<em id="hu38t"><source id="hu38t"></source></em>
    <big id="hu38t"></big>

          1. 產品中心您的位置:網站首頁 > 產品中心 > > > 意大利Givi Misure P89 06052099 05565光柵尺

            Givi Misure P89 06052099 05565光柵尺

            更新時間:2016-02-13

            訪問量:1169

            廠商性質:其他

            生產地址:德意美

            簡要描述:
            KOBOLD DRS-0150G4K0000 流量計*,期貨,親尊重您的每次詢價,把信息發完整(品牌型號數量貴公司名稱),我們不能口頭報價Givi Misure P89 06052099 05565光柵尺

            Givi Misure P89 06052099 05565    光柵尺  Givi Misure P89 06052099 05565    光柵尺  

            KOBOLD    DRS-0150G4K0000    流量計
            KOBOLD    TMA-06416205    流量計
            KOBOLD    NKP-6401/3    液位計
            Givi Misure P89 06052099 05565 光柵尺  KOBOLD    MAN-RD71/B9    壓力表
            KOBOLD    NSP-SW04TPK    流量計
            KOBOLD    TGL-5126C100G  C DIN 16186 G-1/2 L=100 0-160℃    溫度計
            Givi Misure P89 06052099 05565    光柵尺  KOBOLD    PSR-11153R15R1    流量計KOBOLD    DRS-0150G4K0000    流量計
            KOBOLD    PSR-11206R20R1    流量計
            KOBOLD    MAS-5100    流量計配件
            KOBOLD Messring GmbH    TIR-SS4T8C 650-1800℃    溫度傳感器
            KOBOLD Messring GmbH    VKM-3202R0R080R    流量傳感器
            KOBOLD Messring GmbH    VKM3102R0R080B    流量傳感器
            KOBOLD Messring GmbH    3251.073.002    壓力傳感器KOBOLD    DRS-0150G4K0000    流量計

            channels.
            Output Range Resolution Accuracy (% span)
            0 to 1mA 0.554% ±2.0% (±0.002mA)
            0 to 20mA 0.028% ±0.1% (±0.02mA)
            4 to 20mA 0.035% ±0.1% (±0.02mA)
            Maximum Output Current
            22.5mA DC typical.
            Integral Non-Linearity
            ±0.1% of span or ±2 LSB typical, whichever is larger,
            for spans equal to or greater than 16mA.
            Output Compliance
            12V minimum, 12.7V typical.
            Output Load Resistance Range
            0 to 630 ohms typical.
            Response Time
            11ms typical into 500 ohms, for measurement to
            reach 98% of the final value in response to a step
            command. Actual response time will vary with load.
            I Voltage Output (918MB)
            DC Voltage Output Ranges
            Range user-configured. Selection applies to all channels.
            Output Range Resolution Accuracy (% span)
            0 to 1V 0.274% ±0.6% (±6mV)
            0 to 5V 0.055% ±0.1% (±5mV)
            0 to 10V 0.027% ±0.1% (±10mV)
            Maximum Output Voltage
            11.255V DC typical.
            Integral Non-Linearity
            ±0.1% of span or ±2 LSB typical, whichever is larger,
            for spans equal to or greater than 5V.
            Output Current
            0 to 10mA DC maximum.
            Output Impedance
            1 ohm.
            Output Short Circuit Protection
            Included.
            Response Time
            110μs rise time typical, 150μs fall time typical,
            unloaded, for output to reach 98% of the final value
            in response to a step command. Time varies with load.
            I Discrete Output
            Output Type
            Four independent open drain MOSFET switches with a
            common return that operate as low-side switches.
            Output Voltage Range
            0 to 35V DC (up to 1A/channel continuous).
            External voltage source required.
            Output ON Resistance
            0.15 ohms maximum.
            Operation
            Digital outputs are set to their OFF state following a
            software or power-on reset. Outputs may be set to
            user-defined states following a watchdog timeout.
            Watchdog timeout output control takes precedence
            over limit alarm control. Alarm control takes prece-
            dence over host control.
            Output Response Time
            4.1ms typical, from receipt of command to gate
            transition of the output MOSFET.
            I Communication
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Coil (Output) Status Report Slave ID
            Read Holding Registers Reset Slave
            Read Input Registers
            Force Single Coil (Output)
            Preset Single Register
            Force Multiple Coils (Output)
            Preset Multiple Registers
            LED Indicators
            LEDs indicate power, status, and discrete level/alarm.
            I Power and Isolation
            Power Requirements
            10 to 36V DC (918MB), 12 to 36V DC (917MB)
            22 to 26V AC.
            Supply Current
            Supply Current Draw (917) Current Draw (918)
            10V DC Not Recommended 100mA maximum
            12V DC 275mA maximum 85mA maximum
            24V DC 120mA maximum 45mA maximum
            24V AC 210mA rms max. 85mA rms max.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between outputs, network, and power
            circuits.
            I Ordering
            Information
            Models
            917MB-0900
            918MB-0900
            DC current (917MB) or voltage (918MB) output module
            Accessories
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            DC CURRENT OUTPUT
            ANALOG OUTPUT
            CONNECTIONS
            DIGITAL OUTPUTS
            45 46
            TB4
            OUT3
            RTN
            DIGITAL OUTPUT
            TB4
            RTN
            OUT2
            OUT1
            44 43 42 36 41
            TB3
            OUT0
            D
            COM
            COM
            D
            RS485
            33 34 35 31 32
            A
            B
            PWR
            TB3
            TB1
            ANALOG?
            OUTPUT
            ANALOG?
            OUTPUT
            TB2
            AC/DC?
            POWER
            NETWORK?
            COMMUNICATION
            DC VOLTAGE OUTPUT
            TB1
            I0+
            RTN
            12 11
            ANALOG OUTPUTS
            13
            RTN
            I1+
            RTN
            14 15
            ANALOG OUTPUTS
            16
            RTN
            TB2
            21 22
            I2+
            RTN
            I3+
            RTN
            23 24
            RTN
            26 25
            RTN
            TB1
            V0+
            RTN
            12 11
            ANALOG OUTPUTS
            13
            RTN
            V1+
            RTN
            14 15
            ANALOG OUTPUTS
            16
            RTN
            TB2
            21 22
            V2+
            RTN
            V3+
            RTN
            23 24
            RTN
            26 25
            RTN
            TB1/TB2
            +
            L
            R
            I
            TB1/TB2
            +
            L
            R
            WIRING CONNECTIONS
            SAME AS 913/914MB
            10 TO 36V DC?
            OR 24V AC?
            NON-POLARIZED
            I+
            RTN
            V+
            RTN
             
            62
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            924MB
            Multi-Channel
            Temperature
            Control Modules
            Thermocouple or
            Millivolt Input
            Limit Alarms or
            Discrete Outputs
            Model
            924MB: 4 input channels
            Input
            Four input channels:
            Thermocouple (types J, K, T, R, S, E, B, N),
            ±100mV DC
            Output
            Four output channels:
            Open-drain MOSFETs (1A DC loads)
            0 to 35V DC
            Network Communication
            Modbus-RTU high-speed RS-485
            Power Requirement
            10 to 36V DC,
            24V AC
            Approvals
            CE marked. UL, cUL listed
            Class I; Division 2; Groups A, B, C, D.
            I Description
            This signal conditioner is a four-channel analog
            input module with four discrete outputs. It filters
            and linearizes thermocouple inputs while provid-
            ing isolation between input, output, power, and
            network circuits. Cold junction compensation
            and upscale/downscale sensor break detection
            are standard. AC and DC power sources are sup-
            ported with nonpolarized, diode-coupled termi-
            nals.
            The programmable inputs accommodate eight
            thermocouple types plus wide-range millivolt
            signals. Flexible discrete outputs operate as
            alarms or on/off controllers. As limit alarms, each
            discrete output can be configured with high
            and/or low setpoints exclusively tied to an analog
            input channel. Alarm trips function without host
            communication enabling low-cost stand-alone
            alarms as well as local backup for the primary
            control system. Otherwise, on/off control is
            based on commands issued by the host system.
            Combining flexible transmitter functions, mixed
            signal I/O, alarm support, and a network inter-
            face in a single package, makes this instrument
            extremely powerful. Multi-channel design adds
            cost-efficiency and allows high-density mounting.
            Plus, safe, rugged construction makes these
            modules reliable for use in both control room
            and distributed field I/O applications. Custom
            module configurations are also possible (consult
            factory for details).
            I Special Features
            I Standard Modbus RTU protocol with high-speed
            RS-485 communication (up to 115K bps)
            I 16-bit sigma-delta A/D yields 0.1°C resolution
            and 0.5°C measurement accuracy
            I Thermocouple linearization and sensor break
            detection ensure reliable measurements
            I Four discrete outputs enable local temperature
            limit alarms or host-controlled on/off switching
            I Heavy-duty 1A solid-state relays provide
            dependable on/off control of industrial devices
            I Self-calibration lowers maintenance costs by
            reducing periodic manual calibration checks
            I Watchdog timers provide a configurable
            failsafe output state for use when host
            I/O communication is lost
            I Four-way isolation eliminates potential ground
            loops between power, input, output and
            network circuitry
            I Self-diagnostics monitor microcontroller activity
            to detect operational failures (lock-up) and
            execute a reset to restore communication
            Modbus
            Four?
            Thermocouple?
            or?
            DC Millivolt?
            Inputs RS-485
            10-36V DC?
            or 24V AC
            Isolation
            Four?
            Discrete?
            Outputs?
            or?
            Limit Alarms
            Power
            Outputs (4) Inputs (2)
            Inputs (2)
            Thermocouple/Millivolt Input Module
            Modbus/RS-485
             
            63
            M o d b u s I / O
            Modbus I/O BusWorks ?
            I Performance
            I General Input
            Resolution
            ±100mV DC input: 0.1%.
            Thermocouple input: 0.1°C (0.18°F).
            Ambient Temperature Effect
            Better than ±0.005% of input span per °C, or
            ±1.0uV/°C, whichever is greater.
            Noise Rejection
            Normal mode: 40dB @ 60Hz, typical.
            Common mode: 140dB @ 60Hz, typical.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            Input Conversion Rate
            90ms per channel.
            I Thermocouple Input
            Thermocouple Input Ranges
            Thermocouple type user-configured. Type selected
            applies to all channels. Signal linearization, cold-junc-
            tion compensation, and open circuit or lead break
            detection are included.
            TC °C Range (°F Range) Accuracy
            J -210 to 760°C (-346 to 1400°F) ±0.5°C
            K -200 to 1372°C (-328 to 2502°F) ±0.5°C
            T -260 to 400°C (-436 to 752°F) ±0.5°C
            R -50 to 1768°C (-58 to 3214°F) ±1.0°C
            S -50 to 1768°C (-58 to 3214°F) ±1.0°C
            E -200 to 1000°C (-328 to 1832°F) ±0.5°C
            B 260 to 1820°C (500 to 3308°F) ±1.0°C
            N -230 to 1300°C (-382 to 2372°F) ±1.0°C
            Note 1: Accuracy is given with CJC switched off.
            Relative inaccuracy with CJC enabled may increase
            by ±0.5°C.
            Thermocouple Break Detection
            TC sensor failure can be configured for either upscale
            or downscale. Selection applies to all channels.
            I DC Millivolt Input
            Millivolt Input Ranges
            ±100mV DC.
            Millivolt Input Accuracy
            ±0.1% of input range.
            I Discrete Output
            Output Type
            Four independent open drain MOSFET switches with a
            common return that operate as low-side switches.
            Output Voltage Range
            0 to 35V DC, 1A DC maximum for each output.
            External voltage source required.
            Output ON Resistance
            0.15 ohms maximum.
            Operation
            Digital outputs are set to their OFF state following a
            software or power-on reset. Outputs can optionally
            be set to user-defined states following a watchdog
            timeout. Watchdog timeout output control takes
            precedence over limit alarm control. Alarm control
            takes precedence over host control.
            Output Response Time
            4.1ms typical, from receipt of command to gate
            transition of the output MOSFET.
            I Communication
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Coil
            Read Holding Registers
            Read Input Registers
            Force Single Coil
            Preset Single Register
            Force Multiple Coils
            Preset Multiple Registers
            Report Slave ID
            Reset Slave
            LED Indicators
            LEDs indicate power, status, and discrete level/alarm.
            I Power and Isolation
            Power Requirements
            10 to 36V DC,
            22 to 26V AC.
            Supply Current
            Supply  Current Draw
            10V DC 100mA maximum
            24V DC 45mA maximum
            24V AC 85mA rms maximum
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            4-way isolation between input, network, power and
            discrete I/O circuits. Inputs are isolated channel-to-
            channel for common mode voltage to ±5V DC.
            I Ordering
            Information
            924MB-0900
            Thermocouple/millivolt input module
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B01
            Optional terminal block kit, barrier strip style, 2 pcs.
            (Does not include terminal block for input wiring.)
            TBK-S02
            Optional terminal block kit, spring clamp style, 2 pcs.
            (Does not include terminal block for input wiring.)
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            TC INPUT
            ANALOG INPUT
            CONNECTIONS
            TB1/TB2
            IN+
            VOLTAGE
            IN-
            SOURCE
            -
            +
            TB1/TB2
            IN+
            IN-
            DIGITAL OUTPUTS
            45 46
            TB4
            OUT3
            RTN
            DIGITAL OUTPUT
            TB4
            RTN
            OUT2
            OUT1
            44 43 42 36 41
            TB3
            OUT0
            11
            TB1
            12
            CJC-0
            13
            IN0+
            IN0-
            14 15 16
            IN1+
            IN1-
            INPUTS 0,1 CJC-1
            TB2
            21
            IN3+
            IN3-
            25 26 24
            IN2-
            23
            IN2+
            22
            INPUTS 2,3
            D
            COM
            COM
            D
            RS485
            33 34 35 31 32
            A
            B
            PWR
            TB3
            TB1
            ANALOG?
            INPUT
            ANALOG?
            INPUT
            TB2
            AC/DC?
            POWER
            NETWORK?
            COMMUNICATION
            VOLTAGE INPUT
            DIGITAL OUTPUT CONNECTIONS
            OUT 3
            OUT 0
            OUT 2
            RTN
            OUT 1
            RTN
            TB4
            OUT
            RTN
            DIGITAL OUT
            SHARES
            RETURN
            10 TO 36V DC?
            OR 24V AC?
            NON-POLARIZED
            UP TO
            35V DC
            MECHANICAL?
            RELAY INTERFACE
            +
            RTN
            OUT
             
            64
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            932/934MB
            Multi-Channel
            Temperature
            Control Modules
            RTD or Resistance
            Input
            Limit Alarms or
            Discrete Outputs
            Models
            932MB: 2 input channels, 2 relay outputs
            934MB: 4 input channels, 4 relay outputs
            Input
            RTD (100 ohm Pt, 120 ohm Ni, 10 ohm Cu),
            Resistance (0 to 500 ohms)
            Output
            Solid-state relays, Form A, SPST-NO
            Network Communication
            Modbus-RTU high-speed RS-485
            Power Requirement
            10 to 36V DC,
            24V AC
            Approvals
            CE marked. UL, cUL listed
            Class I; Division 2; Groups A, B, C, D.
            I Description
            This signal conditioner is a dual or quad-channel
            analog input module with one discrete/relay out-
            put per input channel and a Modbus interface. It
            filters and linearizes RTD or resistance inputs
            while providing isolation between input, output,
            power, and network circuits. Lead wire compen-
            sation and upscale/downscale sensor break
            detection are standard. Low voltage AC and DC
            power sources are supported with nonpolarized,
            diode-coupled terminals.
            The programmable inputs accommodate four
            RTD types plus wide-range resistance signals.
            Flexible discrete outputs operate as alarms or
            on/off controllers. As limit alarms, each discrete
            output can be configured with high and/or low
            setpoints exclusively tied to an analog input
            channel. Alarm trips function without host com-
            munication enabling low-cost stand-alone alarms
            as well as local backup for the primary control
            system. Otherwise, on/off control is based on
            commands issued by the host system.
            Combining flexible transmitter functions, mixed
            signal I/O, alarm support, and a network inter-
            face in a single package, makes this instrument
            extremely powerful. Multi-channel design adds
            cost-efficiency and allows high-density mounting.
            Plus, safe, rugged construction makes these
            modules reliable for use in both control room
            and distributed field I/O applications. Custom
            module configurations are also possible (consult
            factory for details).
            I Special Features
            I Standard Modbus RTU protocol with high-speed
            RS-485 communication (up to 115K bps)
            I 16-bit sigma-delta A/D yields 0.1°C resolution
            and 0.25°C accuracy (Pt, Ni RTDs)
            I RTD linearization and sensor break detection
            ensure reliable measurements
            I Discrete relay outputs enable local temperature
            limit alarms or host-controlled on/off switching
            I Heavy-duty 1A solid-state relays provide
            dependable on/off control of industrial devices
            I Self-calibration lowers maintenance costs by
            reducing periodic manual calibration checks
            I Watchdog timers provide a configurable
            failsafe output state for use when host
            I/O communication is lost
            I Four-way isolation eliminates potential ground
            loops between power, input, output and
            network circuitry
            I Self-diagnostics monitor microcontroller activity
            to detect operational failures (lock-up) and
            execute a reset to restore communication
            Modbus
            Four?
            RTD?
            or?
            Resistance?
            Inputs RS-485
            10-36V DC?
            or 24V AC
            Isolation
            Four?
            Discrete?
            Outputs?
            or?
            Limit Alarms
            Power
            Outputs (4) Inputs (2)
            Inputs (2)
            RTD/Resistance Input Module
            Modbus/RS-485
             
            65
            M o d b u s I / O
            Modbus I/O BusWorks ?
            I Performance
            I RTD/Resistance Input
            Input Ranges
            Input type user-configured. Type selected applies to all
            channels. RTD linearization, lead wire compensation,
            and open circuit or lead break detection are included.
            Input Type Alpha Input Range Accuracy
            Pt 100 ohm 1.3850 -200 to 850°C ±0.25°C
            Pt 100 ohm 1.3911 -200 to 850°C ±0.25°C
            Ni 120 ohm 1.6720 -80 to 320°C ±0.25°C
            Cu 10 ohm 1.4272 -200 to 260°C ±1.00°C
            Resistance linear 0 to 500 ohms ±0.05 ohm
            Resolution
            Input Type Alpha Resolution
            Pt 100 ohm 1.3850 0.1°C
            Pt 100 ohm 1.3911 0.1°C
            Ni 120 ohm 1.6720 0.1°C
            Cu 10 ohm 1.4272 0.2°C
            Resistance linear 7.8125 milliohms
            Ambient Temperature Effect
            Better than ±0.005% of input span per °C, or
            ±1.0uV/°C, whichever is greater.
            Noise Rejection
            Normal mode: 40dB @ 60Hz, typical.
            Common mode: 130dB @ 60Hz, typical.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            Input Conversion Rate
            300ms per channel typical.
            RTD Break Detection
            Sensor failure can be configured for either upscale or
            downscale. Selection applies to all channels.
            Excitation Current
            1mA DC typical, all types.
            Lead-Wire Compensation
            Inherent for 3-wire RTD. The maximum lead resistance
            is 25 ohms per lead (Pt), 20 ohms per lead (Ni), 10
            ohms per lead (Cu). All lead wires must be of equal
            size and length.
            I Discrete Output
            Output Type
            Solid-State Relay (SSR), one Form A (SPST-NO) switch
            per input channel. Outputs share a common return
            connection at the RTN terminals for low side switching
            Output Voltage Range
            0 to 48V DC, 1A DC.
            Output ON Resistance
            0.4 ohms maximum.
            Output Response Time
            4.1ms typical, from receipt of command to gate
            transition of the output MOSFET.
            Operation
            Digital outputs are set to their OFF state following a
            software or power-on reset. Outputs can be set to
            user-defined states following a watchdog timeout.
            I Communication
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Holding Registers Read Coil
            Read Input Registers Reset Slave
            Preset Single Register  Report Slave ID
            Force Multiple Coils Force Single Coil
            Preset Multiple Register
            LED Indicators
            LEDs indicate power, status, and discrete level/alarm.
            I Power and Isolation
            Power Requirements
            10 to 36V DC (56mA max. at 24V DC).
            22 to 26V AC (94mA rms max. at 24V AC).
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            4-way isolation between input, network, power and
            discrete I/O circuits. Inputs are isolated channel-to-
            channel for common mode voltage to ±5V DC.
            I Ordering
            Information
            932MB-0900
            Two channel RTD/Resistance input module
            934MB-0900
            Four channel RTD/Resistance input module
            Accessories
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            ANALOG INPUT
            CONNECTIONS
            DIGITAL OUTPUT
            TB4 TB3
            TB1
            ANALOG?
            INPUT
            ANALOG?
            INPUT
            TB2
            AC/DC?
            POWER
            NETWORK?
            COMMUNICATION
            DIGITAL OUTPUT CONNECTIONS
            RTN
            OUT 0
            OUT 2
            OUT 1
            RTN
            OUT 3
            TB4
            OUT
            RTN
            DIGITAL OUT
            SHARES
            RETURN
            10 TO 36V DC?
            OR 24V AC?
            NON-POLARIZED
            INL
            IN-
            IN+
            IN+ IN+
            INL
            TB1/TB2
            INL
            IN-
            TB1/TB2
            IN-
            TB1/TB2
            JUMP
            DECADE
            BOX
            JUMP
            2-WIRE RTD
            3-WIRE RTD RESISTANCE
            D
            D
            A
            TB1 TB4
            12
            IN0-
            45
            RTN
            13
            IN0L
            44
            OUT2
            15
            IN1-
            42
            RTN
            16
            IN1L
            41
            OUT0
            TB3
            21
            IN2+
            36
            LRTN
            23
            INL2
            34
            24
            IN3+
            33
            26
            INL3
            31
            PWR
            B
            11 14
            IN0+
            IN1+
            46 43
            OUT3
            OUT1
            22
            IN2-
            TB2
            35
            COM
            25
            IN3-
            32
            934MB Only
            RS485
            RTD INPUTS 2,3
            932MB/934MB
            DIG. OUT DIG. OUT
            RTD INPUTS 0,1
            UP TO
            48V DC
            MECHANICAL?
            RELAY INTERFACE
            +
            RTN
            OUT
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
             
            66
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            942MB
            Frequency/
            Pulse Counter
            Modules
            Periodic or Pulse
            Waveform Input
            Limit Alarms or
            Discrete Outputs
            Model
            942MB: 2 input channels
            Input
            Two input channels:
            0 to 50KHz in three selectable ranges
            Amplitudes up to 140V AC or 200V peak
            Pulse counter range of 0 to 65535
            Output
            Two output channels:
            Solid-state relays (1A DC loads)
            0 to 48V DC
            Network Communication
            Modbus-RTU high-speed RS-485
            Power Requirement
            10 to 36V DC,
            24V AC
            Approvals
            CE marked. UL, cUL listed
            Class I; Division 2; Groups A, B, C, D.
            I Description
            This signal conditioner is a two-channel analog
            input module with discrete outputs and Modbus
            communication. It conditions periodic or pulse
            waveform inputs and provides solid-state relays
            for limit alarms or ON/OFF control.
            Versatile inputs accommodate many applications
            using TTL, magnetic pickups, proximity sensors,
            or a variety of switches (high/low-side transistor,
            dry contact, open drain, open collector). Bipolar
            and unipolar waveforms are supported with a
            selectable input bias that accepts both zero and
            non-zero crossing signals. Voltage threshold and
            relative hysteresis are also user selectable.
            Inputs may also function as event counters with
            separate microcontrollers for each channel. The
            module counts pulses on the positive or negative
            edge. It can wrap around to zero for continuous
            counting, latch at a programmed count value
            (setpoint), or automatically reset itself to zero
            after reaching a setpoint value. Software controls
            enable remote resets. A variety of filters help
            remove noise, jitter, and other mechanical effects
            to prevent false counts.
            The discrete outputs can operate as independent
            alarms or provide on/off control regulated by the
            host system. As limit alarms, each output can be
            set for high and/or low setpoints exclusively tied
            to an analog input. These low cost modules are
            ideal for standalone alarms as well as for local
            backup of the primary control system.
            I Special Features
            I Standard Modbus RTU protocol with high-speed
            RS-485 communication (up to 115K bps)
            I Separate microcontrollers on each channel for
            pulse counting and period measurement
            I Solid-state relay outputs enable local limit
            alarms or host-controlled on/off switching
            I Bipolar and unipolar input signal support
            I Programmable pulse counter functions
            I Input filtering functions include hysteresis,
            averaging, debounce, relay time delay, and
            alarm deadband controls
            I 4-way isolation (input, output, power, network)
            I Watchdog timers provide a failsafe output
            I Self-diagnostics monitor microcontroller activity
            to detect operational failures (lock-up) and
            execute a reset to restore communication
            Modbus
            Two
            Frequency
            or
            Pulse
            Waveform
            Inputs
            RS-485
            10-36V DC?
            or 24V AC
            Isolation
            Two
            Discrete?
            Outputs?
            or?
            Limit Alarms
            Power
            Outputs (2) Inputs (2)
            Frequency/Counter Module
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
            Modbus/RS-485
             
            67
            M o d b u s I / O
            Modbus I/O BusWorks ?
            I Performance
            I Frequency/Counter Input
            Input Ranges
            Input type user-configured. Applies to both channels.
            Input Range Accuracy Accuracy over Temp.
            0 to 100Hz ±0.04Hz ±0.06Hz
            0 to 1000Hz ±0.4Hz ±0.6Hz
            0 to 50,000Hz ±10Hz ±15Hz
            0 to 65,535 pulses ±1 pulse ±1 pulse
            Unipolar Input Configuration
            Amplitude: 0 to 3V minimum range,
            0 to 200V peak maximum range.
            Threshold: Configurable for 1.5V or 5V, typical.
            Hysteresis: Configurable for ±25mV (at 1.5V thresh-
            old), or ±83mV (at 5.0V threshold), typical.
            Bipolar (Zero-Crossing) Input Configuration
            Amplitude (0-20KHz): ±50mV minimum (with ±25mV
            hysteresis), or ±150mV minimum (with ±83mV hys-
            teresis), to ±200V peak maximum.
            Amplitude (Above 20KHz): ±100mV minimum (with
            ±25mV hysteresis), or ±200mV minimum (with ±83mV
            hysteresis), to ±200V peak maximum.
            Threshold: 0mV nominal, 0.01V typical with ±25mV
            hysteresis; 0.03V typical with ±83mV hysteresis.
            Hysteresis: Configurable for ±25mV or ±83mV, typical.
            Resolution
            0 to 100Hz input range: 0.01Hz
            0 to 1000Hz input range: 0.1Hz
            0 to 50,000Hz input range: 1Hz
            Pulse counter: 1 pulse
            Minimum Input Pulse Width
            10μS (frequency input); 5mS (pulse input).
            Counting Rate
            100Hz maximum counting rate
            (5mS ON and 5mS OFF for 10mS period or 100Hz).
            Input Impedance
            35K ohms, typical.
            Input Filter Bandwidth
            -3dB at 35kHz, typical.
            Input Pullup/Pulldown
            Software selectable 2.7K ohm input pullup to +5V and
            a 1K ohm input pulldown to return. The resistors may
            also be left floating (none).
            Input Debounce
            0 to 1.375 seconds, configurable in 5mS increments.
            Noise Rejection
            Common mode: 80dB @ 60Hz, typical with 100 ohm
            input unbalance.
            I Discrete Output
            Output Type
            Solid-State Relay (SSR), one Form A (SPST-NO) switch
            per input channel. Outputs share a common return
            connection at the RTN terminals for low-side switching
            Output Voltage Range
            0 to 48V DC, 1A DC.
            Output ON Resistance
            0.4 ohms maximum.
            Output Response Time
            4.1ms typical, from receipt of command to gate
            transition of the output MOSFET.
            Operation
            Digital outputs are set to their OFF state following a
            software or power-on reset. Outputs can be set to
            user-defined states following a watchdog timeout.
            I Communication
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Holding Registers Read Coil
            Read Input Registers Reset Slave
            Preset Single Register  Report Slave ID
            Force Multiple Coils Force Single Coil
            Preset Multiple Registers
            LED Indicators
            LEDs indicate power, status, and discrete level/alarm.
            I Power and Isolation
            Power Requirements
            10 to 36V DC.
            22 to 26V AC.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            4-way isolation between input, network, power and
            discrete I/O circuits. Inputs are isolated channel-to-
            channel for common mode voltage to ±5V DC.
            I Ordering
            Information
            942MB-0900
            Frequency/counter input module
            Accessories
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            FREQUENCY INPUT
            ANALOG INPUT
            CONNECTIONS
            DIGITAL OUTPUTS
            45 46
            TB4
            DIGITAL OUTPUT
            TB4
            RTN
            OUT1
            44 43 42 36 41
            TB3
            OUT0
            11
            TB1
            12
            FREQ. INPUT 0, 1
            13
            RTN
            NC
            14 15 16
            FRQ1
            RTN
            D
            COM
            COM
            D
            RS485
            33 34 35 31 32
            A
            B
            PWR
            TB3
            TB1
            ANALOG?
            INPUT
            AC/DC?
            POWER
            NETWORK?
            COMMUNICATION
            DIGITAL OUTPUT CONNECTIONS
            OUT 3
            OUT 0
            OUT 2
            RTN
            OUT 1
            RTN
            TB4
            OUT
            RTN
            DIGITAL OUT
            SHARES
            RETURN
            10 TO 36V DC?
            OR 24V AC?
            NON-POLARIZED
            FRQ0
            RTN
            FRQ1
            RTN
            FREQUENCY
            GENERATOR
            -
            +
            MAGNETIC
            PICKUP
            -
            +
            HIGH-SIDE SWITCH?
            (Open Collector/Drain)
            FRQ0
            RTN
            FRQ0
            RTN
            FRQ0
            RTN
            MAGNETIC INPUT
            or
            FRQ0
            RTN
            or
            V+ V+ V+ V+
            LOW-SIDE SWITCH?
            (Open Collector/Drain)
            DRY CONTACT
            FRQ0
            RTN
            TTL
            V+ V+ V+
            NC
            FRQ0
            UP TO
            48V DC
            MECHANICAL?
            RELAY INTERFACE
            +
            RTN
            OUT
            TB1
             
            54
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            901/902/903MB
            Multi-Channel
            Discrete I/O
            Modules
            Active-Low Inputs
            Sinking Outputs
            (Low-Side Switching)
            Models
            901MB: 12 input channels
            902MB: 12 output channels
            903MB: 12 input/output channels
            Input
            Twelve input channels (901, 903 models only)
            0 to 35V DC
            Output
            Twelve output channels (902, 903 models only)
            O to 35V DC
            Network Communication
            Modbus-RTU high-speed RS-485
            Power Requirement
            10 to 36V DC,
            24V AC
            Approvals
            CE marked. UL, cUL listed
            Class I; Division 2; Groups A, B, C, D.
            I Description
            These modules provide twelve discrete input
            and/or output channels. Isolation separates the
            I/O, power, and network circuits. Network
            communication adheres to the industry-standard
            RS-485 Modbus RTU protocol. Both AC and DC
            power sources are supported with wide range,
            nonpolarized, diode-coupled terminals.
            The open-drain outputs are intended for current-
            sinking or low-side switching applications. The
            buffered inputs are active-low. These models are
            the complement of the 904, 905, and 906 units
            which have open-source, high-side output
            switches and active-high inputs. Socketed pull-up
            resistors are easily removed or exchanged to sat-
            isfy your application requirements.
            The 903MB model has twelve input/output
            points that may be used as inputs or outputs on
            a bit-by-bit basis. Outputs may be read back to
            verify output settings.
            Combining flexible I/O types, wide I/O ranges,
            and a network interface in a single package,
            makes this instrument extremely powerful.
            Multi-channel design adds cost-efficiency and
            allows high-density mounting. Plus, safe, rugged
            construction makes these modules reliable for
            use in both control room and distributed field I/O
            applications. Custom module configurations are
            also possible (consult factory for details).
            I Special Features
            I Standard Modbus RTU protocol with high-speed
            RS-485 communication (up to 115K bps)
            I Twelve I/O channels in a single inch-wide unit
            reduces system costs and saves panel space
            I High-voltage, high-current, open-drain outputs
            enable direct (low-side) control of external
            devices
            I High-voltage buffered inputs monitor discrete
            levels from a variety of industrial devices
            I Tandem input/output circuitry (903 models
            only) connects input buffers with open-drain
            outputs for convenient loopback monitoring of
            the output state
            I Outputs have built-in over-temperature and
            over-current shut-down protection, plus active
            clamping circuits for switching inductive loads
            I Watchdog timers provide a configurable
            failsafe output state for use when host
            I/O communication is lost
            I Three-way isolation eliminates potential
            ground loops between power, I/O, and
            network circuitry
            I Self-diagnostics monitor microcontroller activity
            to detect operational failures (lock-up) and
            execute a reset to restore communication
            Modbus
            RS-485
            10-36V DC?
            or 24V AC
            Isolation
            Twelve?
            Discrete?
            Inputs or Outputs
            Power
            Inputs (4)
            or
            Outputs (4)
            Inputs (4)
            or
            Outputs (4)
            Inputs (4)
            or
            Outputs (4)
            High-Density Discrete I/O Module
            Modbus/RS-485
             
            57
            M o d b u s I / O
            Modbus I/O BusWorks ?
            ■ Performance
            ■ Discrete Inputs
            (901 & 903 models only)
            Input Type
            12 active-low, buffered inputs, with a common con-
            nection. Inputs include transient suppression devices
            and series connected 100K ohm resistors, plus diode
            over-voltage clamps to the internal +5V supply.
            Input Signal Voltage Range
            0 to 35V DC, maximum.
            Input Current
            293μA, typical at 35V DC.
            Input Signal Threshold
            TTL compatible with 100mV of hysteresis, typical.
            Low-to-High threshold is 1.7VDC, High-to-Low is
            1.6VDC, typical. Limited to TTL levels of 0.8VDC
            (max. LOW level) and 2.0VDC (min. HIGH level).
            Input Resistance
            100K ohms, typical.
            Input Hysteresis
            100mV DC, typical.
            ■ Discrete Outputs
            (902 & 903 models only)
            Output Type
            12 independent, open-drain, DMOS MOSFET switches
            with a common source connection that operate as
            low-side switches.
            Output Voltage Range
            0 to 35V DC max. (0 to 500mA/channel continuous).
            External voltage source required.
            Output ON Resistance
            0.28 ohms maximum.
            Output Response Time
            Force Single Coil: Output updates within 250μs of
            receipt of a command.
            Force Multiple Coils: First coil updates in 250μs,
            followed successively by additional coils every 180μs.
            ■ General
            I/O Pull-ups and Socket
            5.6K ohm pull-up resistor SIPs are installed in sockets
            at each port (four-channels per port).
            Excitation (per port)
            External excitation voltage for each four-channel port
            is limited to 35V or less.
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Coil (Output) Status
            Read Input Status
            Read Holding Registers
            Force Single Coil (Output)
            Preset Single Register
            Reset Slave
            Force Multiple Coils (Outputs)
            Preset Multiple Registers
            Report Slave ID
            LED Indicators
            LEDs indicate power, status, and discrete level.
            Power Requirements
            10 to 36V DC,
            22 to 26V AC.
            Supply Current
            Supply  Current Draw
            10V DC 130mA maximum
            24V DC 54mA maximum
            24V AC 95mA maximum
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power
            circuits.
            ■ Ordering
            Information
            Models
            901MB-0900
            Discrete input module
            902MB-0900
            Discrete output module
            903MB-0900
            Discrete input/output module
            Accessories
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            DIGITAL INPUT CONNECTIONS (ACTIVE LOW) DIGITAL OUTPUT CONNECTIONS
            RTN
            +5V
            INP
            INP
            RTN
            CH 0
            RTN
            CH 1
            CH 2
            CH 3
            5V TTL LOGIC - INPUT CAN BE PULLED
            UP INTERNALLY OR EXTERNALLY
            DIGITAL I/O
            SHARES
            RETURN
            EXC1
            TB1
            INTERNAL INPUT
            PULL-UPS ARE PRESENT
            DIGITAL IN or OUT
            CH11
            RTN
            46 45 44
            CH10
            RS485
            41 42 43
            EXC3
            TB4
            CH 8
            CH 9
            35 36
            COM
            COM
            TB1
            DIGITAL IN or OUT
            12 11
            CH 0
            EXC1
            CH 1
            13 14 15
            CH 2
            CH 3
            RTN
            16
            DIGITAL IN or OUT
            TB2
            21
            EXC2
            CH 4
            22 24 23
            CH 6
            CH 5
            RTN
            CH 7
            25 26
            34 33
            D
            D
            31 32
            TB3
            PWR
            DIGITAL
            I/O
            10 TO 36V DC
            OR 24V AC
            NON-POLARIZED
            DIGITAL
            I/O
            DIGITAL
            I/O
            AC/DC
            POWER
            NETWORK
            COMMUNICATION
            903MB shown.
            901MB & 902MB
            are similar.
            A
            B
            TB3
            TB2
            TB4
            TB1
            CH 0
            RTN
            CH 1
            CH 2
            CH 3
            EXC1
            TB1
            OUT
            RTN
            DIGITAL I/O
            SHARES
            RETURN
            EXC
            INP
            SPST
            RELAY
            12-24V DC,
            TYPICAL
            +
            RTN
            EXC
            RTN
            INP
            5-35V
            V
            RTN
            I/O
            902MB/903MB
            ON
            TO OTHER 3
            CHAN OF PORT 100K
            OFF
            EXC
            903MB
            +5V
            LOAD
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
             
            56
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            904/905/906MB
            Multi-Channel
            Discrete I/O
            Modules
            Active-High Inputs
            Sourcing Outputs
            (High-Side Switching)
            Models
            904MB: 12 input channels
            905MB: 12 output channels
            906MB: 12 input/output channels
            Input
            Twelve input channels (904, 906 models only)
            0 to 35V DC
            Output
            Twelve output channels (905, 906 models only)
            6 to 35V DC
            Network Communication
            Modbus-RTU high-speed RS-485
            Power Requirement
            10 to 36V DC,
            24V AC
            Approvals
            CE marked. UL, cUL listed
            Class I; Division 2; Groups A, B, C, D.
            I Description
            These modules provide twelve discrete input
            and/or output channels. Isolation separates
            the I/O, power, and network circuits. Network
            communication adheres to the industry-standard
            RS-485 Modbus RTU protocol. Both AC and DC
            power sources are supported with wide range,
            nonpolarized, diode-coupled terminals.
            The outputs are intended for current-sourcing or
            high-side switching applications. The buffered
            inputs are active-high. These models are the
            complement of the 901, 902, and 903 units
            which have low-side output switches and
            active-low inputs. Socketed pull-down resistors
            are easily removed or exchanged to satisfy your
            application requirements.
            The 906MB model has twelve input/output
            points that may be used as inputs or outputs on
            a bit-by-bit basis. Outputs may be read back to
            verify output settings.
            Combining flexible I/O types, wide I/O ranges,
            and a network interface in a single package,
            makes this instrument extremely powerful.
            Multi-channel design adds cost-efficiency and
            allows high-density mounting. Plus, safe, rugged
            construction makes these modules reliable for
            use in both control room and distributed field I/O
            applications. Custom module configurations are
            also possible (consult factory for details).
            I Special Features
            I Standard Modbus RTU protocol with high-speed
            RS-485 communication (up to 115K bps)
            I Twelve I/O channels in a single inch-wide unit
            reduces system costs and saves panel space
            I High-voltage, high-current, open-source
            outputs enable direct (high-side) control of
            external devices
            I High-voltage buffered inputs monitor discrete
            levels from a variety of industrial devices
            I Tandem input/output circuitry (906 models
            only) connects input buffers with open-source
            outputs for convenient loopback monitoring of
            the output state
            I Watchdog timers provide a configurable
            failsafe output state for use when host
            I/O communication is lost
            I Three-way isolation eliminates potential
            ground loops between power, I/O, and
            network circuitry
            I Self-diagnostics monitor microcontroller activity
            to detect operational failures (lock-up) and
            execute a reset to restore communication
            Modbus
            RS-485
            10-36V DC?
            or 24V AC
            Isolation
            Twelve?
            Discrete?
            Inputs or Outputs
            Power
            Inputs (4)
            or
            Outputs (4)
            Inputs (4)
            or
            Outputs (4)
            Inputs (4)
            or
            Outputs (4)
            High-Density Discrete I/O Module
            Modbus/RS-485
             
            57
            M o d b u s I / O
            Modbus I/O BusWorks ?
            I Performance
            I Discrete Inputs
            (904 & 906 models only)
            Input Type
            12 active-high, buffered inputs, with a common con-
            nection. Inputs include transient suppression devices
            and series connected 100K ohm resistors, plus diode
            over-voltage clamps to the internal +5V supply.
            Input Signal Voltage Range
            0 to 35V DC, maximum.
            Input Current
            293μA, typical at 35V DC.
            Input Signal Threshold
            TTL compatible with 100mV of hysteresis, typical.
            Thus, Low-to-High threshold is 1.5VDC, High-to-Low is
            1.4VDC, typical. Limited to TTL levels of 0.8VDC
            (max. LOW level) and 2.0VDC (min. HIGH level).
            Input Resistance
            5.6K ohms with standard factory pull-down resistors
            installed. 100K ohms without pull-downs.
            Input Hysteresis
            100mV DC, typical.
            Input Response Time
            500ns for low-to-high, 2μS for high-to-low, typical.
            Microcontroller samples inputs as a group every 10mS.
            I Discrete Outputs
            (905 & 906 models only)
            Output Type
            12 independent, open-source, MOSFET switches that
            operate as high-side switches.
            Output Voltage Range
            6 to 35V DC (0 to 250mA/channel continuous).
            External excitation voltage required.
            Output ON Resistance
            0.15 ohms maximum.
            Output Response Time
            Outputs update within 50ms of a write command and
            switch within 5mS of receipt of command. Loopback
            response (906MB) is 1μS low-to high, 5μS high-to-low.
            I General
            I/O Pull-downs and Socket
            5.6K ohm pull-down resistor SIPs are installed in
            sockets at each port (four-channels per port).
            Excitation (per port)
            External excitation voltage for each four-channel port
            is limited to 35V or less.
            Supported Modbus Commands
            The command/response protocol for communicating
            with this module adheres to the Modbus/RTU standard
            for the following Modbus Functions.
            Read Coil (Output) Status
            Read Input Status
            Read Holding Registers
            Read Input Registers
            Force Single Coil (Output)
            Preset Single Register
            Reset Slave
            Force Multiple Coils (Outputs)
            Preset Multiple Registers
            Report Slave ID
            LED Indicators
            LEDs indicate power, status, and discrete level.
            Power Requirements
            10 to 36V DC,
            22 to 26V AC.
            Supply Current
            Supply  Current Draw
            10V DC 90mA maximum
            24V DC 40mA maximum
            24V AC 75mA rms maximum
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power
            circuits.
            I Ordering
            Information
            Models
            904MB-0900
            Discrete input module
            905MB-0900
            Discrete output module
            906MB-0900
            Discrete input/output module
            Accessories
            900C-SIP
            Configuration Software Interface Package
            (includes software CD-ROM for Windows, RS-232/485
            converter, and RS-485/three-wire cable)
            4001-095
            USB-to-RS232 adapter. See page 70 for more info.
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            For more information on software, network hardware,
            and mounting accessories, please see Pages 69-71.
            DIGITAL INPUT CONNECTIONS (ACTIVE HIGH)
            DIGITAL IN or OUT
            45 46
            TB4
            CH11
            COM
            TB4
            CH 9
            CH10
            CH 8
            44 43 42 36 41
            TB3
            EXC3
            10 TO 36V DC?
            OR 24V AC?
            NON-POLARIZED
            D
            COM
            COM
            D
            RS485
            33 34 35 31 32
            A
            B
            PWR
            TB3
            TB1
            DIGITAL?
            I/O
            DIGITAL?
            I/O
            DIGITAL?
            I/O
            TB2
            AC/DC?
            POWER
            NETWORK?
            COMMUNICATION
            TB1
            EXC1
            CH 0
            12 11
            DIGITAL IN or OUT
            13
            CH 1
            CH 2
            CH 3
            14 15 16
            RTN
            TB2
            EXC2
            CH 4
            22 21
            DIGITAL IN or OUT
            23
            CH 5
            CH 6
            CH 7
            24 25 26
            RTN
            906MB shown.?
            904MB & 905MB?
            are similar.
            INP
            COM
            INP
            RTN
            +5V
            COM
            INP
            TB1
            RTN
            CH 3
            CH 2
            CH 1
            CH 0
            EXC1
            DIGITAL I/O?
            SHARES
            COMMON
            INTERNAL ?
            INPUT ?
            PULL-DOWNS?
            ARE PRESENT
            5V TTL LOGIC INPUT IS ACTIVE HIGH?
            AND PULLED DOWN INTERNALLY
            DIGITAL OUTPUT CONNECTIONS
            CH 0
            RTN
            CH 1
            CH 2
            CH 3
            EXC1
            TB1
            OUT
            RTN
            DIGITAL I/O
            SHARES
            RETURN
            UP TO?
            35V DC
            SPST?
            RELAY
            +
            RELAY COIL/SOLENOID DRIVER (905MB/906MB)
            Locate
            Snubber
            at Coil
            5-35V
            Typical
            ON (1)
            EXC
            I/O
            RTN
            905MB
            OFF (0)
            R
            TO OTHER 3
            CHAN OF PORT
            CH
            LED
            OPEN
            INTERNAL PULL-
            DOWN IS OPEN
            FOR 905MB
            +
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
             
            68
            9 0 0 M B S e r i e s
            Modbus I/O BusWorks ?
            26 25 24
            TB2 TB1
            (110.5)
            4.35
            (99.1)
            3.90
            23 22 21
            TB2
            16 15 12 13 14 11
            TB1
            D
            A
            B
            PWR
            TB3
            33 31 32 36 34 35
            TB4
            41 42 43 44 45 46
            D
            COM
            COM
            RS485
            TB3
            TB4
            DFT
            3 2
            1 0
            ST
            (118.9)
            4.68
            (95.3)
            3.75
            Acromag
            RUN
            C
            L
            (26.7)
            1.05
            (59.4)
            2.34
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            "T" Rail Din Mounting
            Din EN 50022, 35mm
            900MB Series Technical Diagrams
            PERSONAL COMPUTER
            W/ WINDOWS 95/98 OR NT
            RS-232 SERIAL
            PORT CONNECTOR
            AT BACK OF PC
            RS-232 TO RS-485 CONVERTER
            MODEL 5034-214
            900C-SIP COMMUNICATION CONNECTIONS
            CONNECT THE RS-232
            SIDE OF CONVERTER
            TO THE PC
            42 43 45 44
            TB4
            46
            0 1
            DFT
            TB4
            ST
            STATUS LED (YELLOW)
            RUN/PWR LED (GREEN)
            DEFAULT MODE SWITCH -
            PUSH FOR DEFAULT MODE.
            STATUS LED FLASHES IN
            DEFAULT MODE.
            RUN
            Acromag
            INSTALL MODBUS
            CONFIGURATION
            SOFTWARE
            CAUTION: DO NOT CONNECT THE
            CABLE DIRECTLY TO THE PC WITHOUT
            THE CONVERTER, OR DAMAGE TO
            THE MODULE MAY RESULT.
            CABLE 5034-202
            COM
            D
            D
            CONNECT THE RS-485
            SIDE OF CONVERTER
            TO THE CABLE
            CONNECT WIRES AS SHOWN
            RS-485
            GREEN C
            BLACK
            RED
            B
            A
            COLOR WIRE
            B A
            C
            TB3
            D
            32
            B
            PWR
            31
            A
            TB4
            COM D
            COM
            COM
            36 35
            D
            D
            34 33
            RS485
            41
            TB3
            16 22 21
            TB2
            23 24 26 25
            TB2 TB1
            REFER TO THE USER'S MANUAL
            THAT CAME WITH YOUR MODULE
            TO COMPLETE THE MODULE'S
            POWER AND I/O CONNECTIONS
            3 2
            R
            TB1
            12 13 11
            ANY 900MB MODULE
            TB1
            14 15
            PC RUNNING?
            ACROMAG?
            MODBUS CONFIG?
            SOFTWARE
             
            69
            M o d b u s I / O
            Modbus I/O BusWorks ?
            Software
            Interface Package
            This package includes Windows ? Configuration
            Software, an RS-232-to-485 Serial Port
            Converter, and an RS-485 Signal Cable. These
            components provide everything you need to set
            up a Series 900 I/O module from your desktop
            PC before installing it on the network.
            I Ordering Information
            900C-SIP
            Software Interface Package.
            Includes Configuration Software (5034-186),
            Non-isolated RS-232 to RS-485 Serial Port Converter
            (5034-214), and RS-485 Cable (5034-202).
            Items can also be ordered separay below.
            5034-186
            Configuration Software for Windows (95/98/2000/ME/
            NT4/XP) on CD-ROM.
            5034-214
            Non-isolated RS-232 to RS-485 Serial Port Converter,
            DB-9F to DB-9F.
            5034-202
            RS-485 to 3-wire Cable Converter,
            DB-9M to 3 x 12AWG RS-485 Cable, 8 ft.
            Software Interface Package
            Model No. 900C-SIP
            RS-232 to RS-485
            Converter
            (non-isolated)
            Configuration Software
            for Windows
            RS-485 Cable
            (DB-9)
            Configuration Kit
            Universal 50W
            Power Supply
            The PS5R-D24 is the
            ideal power source
            to drive your
            network.
            Input Power
            Requirement
            Universal power
            85 to 264V AC,
            105 to 370V DC
            Output
            24V DC, 2.1A (50W)
            I Ordering Information
            PS5R-D24
            Universal Power Supply
            DIN-Rail
            Mounting
            For your convenience, Acromag offers several
            mounting accessories to simplify your system
            installation. Our 19” rack-mount kit provides a
            clean solution for mounting your I/O modules
            and a power supply. Or you can buy precut DIN
            rail strips for mounting on any flat surface.
            I Ordering Information
            20RM-16-DIN
            19" rack-mount kit with DIN rail.
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T, 3 inches (75mm) or
            16.7 inches (425mm)
            V.ADJ
            DC ON
            M3.5
            Terminal Screws
            10-?6.5
            4-?4.5
            80
            13 13 13 13
            90
            12
            7.35
            75
            60 5
            Top View
            (dimensions in mm)
            35.3
            6
            95
            3.8
            Side View
            (dimensions in mm)
            Dimensions in inches (mm).
            RS-232/485?
            Converter?
            (non-isolated)
            5034-214
            RS-485?
            to 3-wire
            5034-202
            Network Power
            Mounting Hardware
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            PERSONAL COMPUTER
            RUNNING WINDOWS
            98/ME/2000/XP
            6 FEET OF CABLE
            USB MALE
            DB9P
            RS232
            4001095
            USB SERIAL CONVERTER
            LED
            TO HOST USB PORT HOST
            USB
            CONFIGURATION
            SOFTWARE
            ACROMAG
            HOST PC RUNNING
            Bulletin #8400-572
            Description
            This device is a USB-to-serial adapter that you
            can use to communicate with many Acromag I/O
            products for setup and re-configuration for your
            application.
            Key Features & Benefits
            ■ Connects to I/O modules via USB
            (other adapters may be necessary)
            ■ Complete RS232 control signals
            ■ Conforms to USB Specification, Version 1.1
            ■ USB-powered
            ■ Cable length, 6 ft., UL approved
            Performance Specifications
            USB Specification
            Version 1.1
            Data rate
            Up to 115.2Kbps
            Environmental Standards
            RoHS-compliant
            Basic Power Consumption
            150mA
            PC Requirements
            Windows ? 7 (32-/64-bit) / Vista (32-/64-bit) /
            XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) /
            2000 / ME / 98SE / 98
            Ordering Information
            NOTE: For more information visit .
            Adapters
            4001-095
            USB to serial adapter. Includes driver CD and manual.
            5030-913
            Serial port adapter. DB9S connector to RJ11 jack.
            5034-202
            RS-485 to 3-wire cable converter and cable, DB-9M to
            3 x 12AWG RS-485 cable, 8 ft.
            5032-287
            RS-232 to 151T transmitter configuration device
            converter and cable, 6 ft.
            5034-214
            Non-isolated RS-232 to RS-485 Serial Port Converter,
            DB-9F to DB-9F.
            Cables
            5030-902
            Cable. 6 feet long with RJ11 plug at each end.
            Simplifies configuration of Acromag I/O Modules ◆ Enables configuration via USB port
            Model 4001-095 USB-to-Serial Adapter
            Accessories
            All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2009. Data subject to change without notice. Printed in USA 10/2009.
            9-PIN CONNECTOR (DB9S)
            RJ11 PLUG
            (6 CONDUCTOR)
            (6 CONDUCTOR)
            RJ11 JACK
            INLIPACK
            MODEL 5030-913
            SERIAL ADAPTER
            MODEL 5030-902
            (6 feet long)
            B
            C
            D D
            RS-232
            COM
            A
            RS-485
            5034-202
            CABLE 5034-202
            RS232 TO RS485 SERIAL
            CONVERTER
            (MODEL 5034-214)
            DB9 MALE
            DB9 FEMALE DB9 FEMALE
            6 FEET OF CABLE
            TOP VIEW
            Acromag
            1046-016
            3 & 4 Wire RTD
            3 4
            +
            -T/C, mV+
            1 2

            1
            2
            4
            PLUG INTO TOP
            OF TRANSMITTER
            TOP VIEW
            3
            TO RS232
            151T TRANSMITTER
            151C-SIP
            INTERFACE ADAPTER
            Acromag
            1046-016
            Transmitter
            temperature
            of 151T
            plug into top
            MODEL 5032-787
            InliPack 800x Series
            Adapter and Cable
            151T Transmitter Series
            Adapter and Cable
            900MB Modbus Series
            Adapter and Cable
            248-295-0880 ■ 248-624-9234 ■  ■  ■ 30765 Wixom Rd, Wixom, MI 48393 USA
            Network Accessories: 4683 Series
            Bulletin #8400-404d
            Description
            Models
            4683-TTM-1F: 115V AC Power
            4683-TTM-2F: 230V AC Power
            4683-TTM-3F: 24V AC Power
            Acromag’s RS-485 network repeater device
            allows users to take full advantage of the RS-485
            standard’s extended communication distances
            and multi-dropping capabilities. In addition,
            these devices offer field selectable End-of-Line
            Network (EOLN) terminations on both the A and
            B networks.
            Operation is transparent to all devices and
            no handshaking is required. Up to thirty-two
            RS-485 devices can be driven. Network repeaters
            are ready to mount on any base plate. Or, for
            a harsh environment, it can be installed in a
            NEMA enclosure of your choice. No enclosure
            is necessary for use in a laboratory or office.
            Installation requires mounting, connecting power
            and cables, and setting the baud rate.
            Approvals
            UL/cUL listed:
            Energy management equipment
            Key Features & Benefits
            ■ Designed for use with Johnson Controls
            N2 or BACnet bus
            ■ No handshaking
            ■ No extra control lines
            ■ I/O signal isolation
            ■ Baud rates of 600, 1200, 2400, 4800, 9600,
            19.2K, 38.4K, and 76.8K are switch selectable
            ■ Field-selectable end-of-line network
            terminations on both A and B sides
            ■ Electrical transient protection is provided. This
            protects the host computer from destructive
            noise spikes and other
            transient signals.
            ■ Status LED’s indicate transmission
            direction, RS-485 bus fault conditions, and
            power applied.
            ■ 24/115/230V AC power available
            ■ No separate transformer required with 24V AC
            units (4683-TTM-3F)
            Operation
            Model 4683-TTM-xF network repeaters
            isolate and boost RS-485 signals allowing
            communication signals to travel another 4000 ft.
            Each repeater permits the addition of another 32
            unit load to a network.
            The repeater has two RS-485 “sides” known as
            the A and B sides. The A side
            typically connects to the network towards the
            host and the B side connects to the extended
            network. Functionally, the A and B sides are
            equivalent.
            Repeaters receive AC power through a 3-screw
            terminal strip. Transient signal protection is
            provided on both RS-485 sides.
            When both RS-485 lines are idle, each side is
            in receive mode. When a ‘1’ to ‘0’ transition is
            detected (signifying a start bit) on either side,
            the opposite side’s transmitter is enabled. The
            transmitter stays enabled for one character’s time
            (based on the baud rate switch setting). The
            received character is then passed through.
            For N2 or BACnet MS/TP bus ◆ Drives up to 32 RS-485 devices ◆ Isolates and boosts signal up to 4000 ft.
            4683-TTM RS-485 to RS-485 Network Repeater
            D D D COM D COM
            RS-485
            SIDE B
            BAUD
            RATE
            G W
            L2 G
            FAULT
            A
            FAULT
            B
            AC (HI)
            Status
            LEDs
            PWR
            GROUND
            L1
            L1
            RS-485
            SIDE A
            AC (LO)
            NETWORK CONNECTIONS
            4683-TTM-1F (115VAC)
            4683-TTM-2F (230VAC)
            4683-TTM-3F (24VAC) G COM HOT
            1 - 600
            2 - 1200
            3 - 2400
            4 - 4800
            5 - 9600
            6 - 19.2K
            7 - 38.4K
            8 - 76.8K
            RS-485
            SIDE B
            24V DC
            RTN
            COM
            D
            D
            D
            R T
            R T
            _
            24V DC
            RS-485
            SIDE A
            COM
            D
            R T
            R T
            _
            NC
            S1
            1 2 3 4 5 6 7 8
            TX
            A - B
            TX
            B - A
            Status
            LEDs
            Baud Rate
            Switches
            AC
            Input TB1 TB2
            TB3
            O
            N
            248-295-0880 ■ 248-624-9234 ■  ■  ■ 30765 Wixom Rd, Wixom, MI 48393 USA
            All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2013. Data subject to change without notice. Printed in USA 9/2013.
            4683-TTM RS-485 to RS-485 Network Repeater
            Network Accessories: 4683 Series
            Acromag, Inc. Phone:(248) 295-0880 ?: (248) 624-9234 - 4 - ?:  ?On-Line: http://
            The station configuration drawing is for general illustration purposes only. Johnson Controls
            system customers should instead refer to the Metasys? Network Technical Manual for N2 Bus
            Communication, or the MS/TP Communication Bus Technical Bulletin for wiring connections using the
            4683-TTM-xF repeater.
            R
            R
            R
            R
            T
            D
            32 6 5 8
            D
            R RR R
            3
            2
            5
            2
            3
            4
            5
            7
            8
            10
            11
            12
            13
            6
            7
            8
            9
            14
            15
            17
            18
            20
            22
            23
            25
            R
            R R
            COM
            TX
            B - A
            R
            COM
            24VDC 24VDC
            1
            4
            1
            6
            9
            16
            19
            21
            24
            2
            3
            T
            D
            1 4 7
            T T
            D
            W L2
            POWER FAULT
            A
            BAUD
            RATE
            RS-485 SIDE A
            A-N3
            S1
            NC
            R
            RS-485 SIDE B
            TX
            A - B
            FAULT
            B
            RTN
            OR
            C
            A
            COM
            TX
            RX
            TX
            RX
            5 COM
            TX
            RX
            7
            3
            DSR
            RX
            RTS
            G
            L1
            G
            L1
            G
            A-N2
            B
            2
            CD
            CTS
            TX
            AC (LO)
            -1 OPTION
            115VAC
            RED POWER LED
            AC (LO) COM AC (LO)
            -3 OPTION
            24VAC
            3 - 2400
            4 - 4800
            7 - 38.4K
            8 - 76.8K
            S1 - BAUD RATE
            1 - 600 5 - 9600
            1 - 600 5 - 9600
            2 - 1200 6 - 19.2K
            3 - 2400 7 - 38.4K
            4 - 4800 8 - 76.8K
            B-N1
            NC
            A-N32
            A-N31
            RS232
            C
            B
            A
            HOST
            DE9
            COM
            DB25
            Ground
            AC (HI)
            acromag
            Ground
            AC (HI)
            Ground
            HOT AC (HI)
            ANY
            RS485
            DEVICES
            S1 - SET BAUD RATE
            TO MATCH BAUD
            RATE OF NETWORK.
            2 - 1200 6 - 19.2K
            RS485 REPEATER
            MODEL 4683-TTM-X
            RS485
            A-N30
            B-N2 B-N3
            RS485
            B-N4 B-N5
            UP TO 32
            NODES PER
            NETWORK
            SEGMENT
            B-N32
            COM
            SIGNALS AT
            CONVERTER
            HOST
            RED RS485 FAULT LED (SIDE A)
            TRANSMIT DIRECTION
            B-TO-A & A-TO-B
            -2 OPTION
            230VAC
            DE9
            DB25
            TO HOST
            CONNECTIONS
            TO HOST COMPUTER
            HOST PC
            RED RS485 FAULT LED (SIDE B)
            NOTE: SIDE-A AND SIDE-B EOL
            TERMINATION JUMPERS ENABLED
            UP TO 32
            NODES PER
            NETWORK
            SEGMENT
            120 OHM TERMINATION
            RESISTOR REQUIRED
            AT END OF NETWORK
            OR LAST DEVICE ONLY
            IMPORTANT:
            MODEL 4683-TTM-X UNITS
            INCLUDE INTERNAL, FIELD
            SELECTABLE END-OF-LINE
            (EOL) TERMINATION
            RESISTORS FOR THE A AND
            B SIDES. THESE ARE
            ENABLED VIA INTERNAL
            JUMPERS. DO NOT USE
            EXTERNAL TERMINATION
            WITH INTERNAL EOL
            JUMPERS ENABLED.
            SEE UNIT LABEL
            TO VERIFY POWER
            REQUIREMENTS
            NOTE: JUMPERED PINS ARE
            NULL-MODEM CONNECTIONS
            WHICH ALLOW COMMUNICATION
            BETWEEN THE HOST AND
            ACROMAG SERIES 4100/4200
            I/O STATIONS.
            EXTENDED NETWORK
            ANY RS-485 DEVICE
            MODEL 4683-TTM-XF REPEATER
            SYSTEM CONNECTIONS
            RS485
            Converter
            248-295-0880 ■ 248-624-9234 ■  ■  ■ 30765 Wixom Rd, Wixom, MI 48393 USA
            All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2013. Data subject to change without notice. Printed in USA 9/2013.
            4683-TTM RS-485 to RS-485 Network Repeater
            Network Accessories: 4683 Series
            3 2 1
            J4
            2
            J1
            2 2
            J2
            2
            3
            D
            S1
            D D
            3 2 1
            3
            1
            3
            1
            3
            1
            J4
            1
            8 6 7
            J2 J1
            5 3 4 2 1
            J3
            J2
            J4J3
            2
            J1
            COM D COM
            3
            2
            F1
            Vcc
            D
            D
            EOL
            DISABLED
            EOL
            DISABLED
            3
            1
            RS-485
            SIDE B
            J3
            TX
            A - B
            FAULT
            B
            1
            TX
            B - A
            BAUD
            RATE
            G W
            L2 G
            FAULT
            A
            AC (HI)
            FUSE 3AG
            0.5A, 250V
            Status
            LEDs
            Status
            LEDs
            1200 OHMS
            PWR
            220 OHMS
            1200 OHMS
            JUMPER PAIR
            (ONE SIDE)
            EOL
            ENABLED
            EOL Jumpers
            Side B (OUT)
            EOL
            ENABLED
            EOL Jumpers
            Side A (IN)
            GROUND
            L1
            L1
            RS-485
            SIDE A
            EOL JUMPERS
            EQUIVALENT CIRCUIT
            (4683 UNITS ONLY)
            AC (LO)
            NETWORK CONNECTIONS
            REMOVE THIS SCREW ON EACH
            SIDE TO REMOVE COVER
            Baud Rate
            Switches
            G COM HOT
            1 - 600
            2 - 1200
            3 - 2400
            4 - 4800
            5 - 9600
            6 - 19.2K
            7 - 38.4K
            8 - 76.8K
            MODEL 4683-TTM-1F REPEATER
            MODEL 4683-TTM-2F REPEATER
            MODEL 4683-TTM-3F REPEATER
            End-of-Line (EOL) Termination Jumper Locations.
            Input Power Fuse Location.
            RS-485
            SIDE B
            24V DC
            RTN
            COM
            D
            D
            D
            R T
            R T
            _
            24V DC
            RS-485
            SIDE A
            COM
            D
            R T
            R T
            _
            NC
            4683-TTM-1F (115VAC)
            4683-TTM-2F (230VAC)
            4683-TTM-3F (24VAC)
            NOTE:
            -3F 24V AC units do not require a
            separate transformer. 24V AC power
            from the RS-485 devices may be used.
            T
            2 1
            S1
            5 4 3 8 7 6
            T
            T
            D
            D
            NC
            R
            R
            D
            COM
            RTN
            24VDC
            4.30
            2.10
            TYP
            0.30
            3.70
            BAUD
            RATE
            T
            (53.34)
            (7.62)
            (93.98) acromag
            FAULT
            A
            6.40
            7.0
            R
            R
            RS-485
            SIDE A
            TX
            B - A
            COM
            RS-485
            SIDE B
            FAULT
            B
            TX
            A - B
            D
            24VDC
            (177.80)
            TYP
            0.30
            POWER
            (109.22)
            (162.56) (7.62)
            1 - 600
            2 - 1200
            3 - 2400
            4 - 4800
            5 - 9600
            6 - 19.2K
            7 - 38.4K
            8 - 76.8K
            Switch Variation  Switch Operation
            Slide Switch  Slide with arrow
            to turn ON.
            Slide opposite to
            arrow to turn Off.
            Toggle Switch  Depress toward
            numbers to turn
            On (Closed).
            Depress toward
            OPEN to turn Off.
            248-295-0880 ■ 248-624-9234 ■  ■  ■ 30765 Wixom Rd, Wixom, MI 48393 USA
            All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2013. Data subject to change without notice. Printed in USA 9/2013
            Network Accessories: 4683 Series
            4683-TTM RS-485 to RS-485 Network Repeater
            Performance Specifications
            ■ Communication Specifications
            Baud Rates
            Switch settings on unit for 600, 1200, 2400, 4800,
            9600, 19.2K, 38.4K, and 76.8K baud rates. Switch
            must be in the proper baud rate position for proper
            operation.
            RS-485 Bus Loading
            One unit load equivalent.
            RS-485 Bus Drive
            Complete RS-485 compliance for up to 32 unit loads
            (31 unit loads if a repeater is used).
            End-of-Line Termination Network
            The EOLN termination network
            is shown on the right and is
            individually selected on both
            the A and B sides by a pair of
            shorting clips. The A-side is
            controlled by jumper pair J1, J2
            and the B-side is controlled by
            jumper pair J3 and J4.
            The EOLN termination network
            is enabled for the A side or B
            side when the associated pair
            of jumpers are positioned over
            pins 1 and 2. Conversely, the EOLN is disabled (out of
            the circuit) when the pair jumpers are positioned over
            pins 2 and 3.
            Duplex
            Half duplex only.
            Data Format
            Ten bits typical (1 start bit, 8 data bits, and 1 stop bit).
            Other formats are supported.
            ■ Specifications
            Power Line Fuse
            0.5A, 125V, 0.75A, 3AG type.
            Isolation
            Provides galvanic and opto-coupler isolation between
            RS-485(A), RS-485(B), AC power, and chassis ground.
            Common mode voltages are permitted up to 250V
            rms or 354V DC (withstands a 1500V AC dielectric
            strength test for 1 min. without breakdown) on a
            continuous basis. Complies with requirements outlined
            in ANSI C39.5-1974 for voltage ratings specificed.
            RFI Resistance
            Withstands an RFI field strength of 10V per meter at
            27 Mhz, 151 Mhz, and 467 Mhz with no digital effect,
            per SAMA PMC 33.1.
            Line Noise Effects
            Field and power line terminals withstand ANSI/IEEE
            C37.90-1978 Surge Withstanding Capability (SWC)
            Test with no component
            failures. Unit is tested to a standardized test
            waveform that is representative of surges
            (high-frequency transient electrical interference),
            observed in actual installations.
            Communications Connections
            Network repeater - both RS-485 connectors use
            modular terminal blocks with screw clamps. Wire
            range 14 to 26 AWG.
            Power Wire Connections
            Network repeater terminal block. See label on unit for
            power to be applied to unit.
            Shipping Weight
            3.0 pounds (1.4 kg) packed per unit.
            ■ Environmental
            Operating temperature
            -25 to 70° C (-13 to 158° F)
            Storage temperature
            -25 to +85° C (-13 to 185° F)
            Relative humidity
            0 to 95% RH (noncondensing),
            up to 40° C (104° F).
            Power
            4683-TTM-1F
            115VAC ±10%, 50/60 Hz, 0.05A
            4683-TTM-2F
            230VAC ±10%, 50/60 Hz, 0.03A
            4683-TTM-3F
            24VAC ±10%, 50/60 Hz, 0.18A typical
            Approvals
            UL/cUL listed – energy management equipment.
            Ordering Information
            Models
            4683-TTM-1F
            115V ACPower.
            4683-TTM-2F
            230V ACPower.
            4683-TTM-3F
            24V ACPower.
            Accessories
            See  for more information.
            3 2 1
            D
            3 2 1
            D
            1200
            Ohms
            1200
            Ohms
            220
            Ohms
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            Bulletin #8400-568b
            Description
            Acromag’s configuration software is the key
            to the I/O modules’ easy-to-use operation.
            The software employs the friendly Windows ?
            interface with pull-down selection menus and
            fill-in-the-blank fields to speed you through a
            few brief configuration screens. No programming
            is required.
            This package includes the Configuration
            Software, an RS232-to-485 Serial Port Converter,
            RS485 Signal Cable, and an USB to Serial
            adapter. These components provide everything
            you need to set up a Series 900 I/O module
            from your desktop PC before installing it on the
            network.
            Software Compatibility
            Windows XP, Vista, 7.
            Ordering Information
            NOTE: For more information, visit .
            Models
            900C-SIP
            Configuration Software Interface Package. Includes
            user manual, CD, non-isolated RS232-to-RS485 serial
            port converter (5034-214), RS485 cable (5034-202),
            and USB adapter (4001-095).
            4001-095
            USB-to-DB9 serial port (RS232) adapter.
            5034-186
            Configuration software on CD-ROM.
            5034-202
            RS485 to 3-wire cable converter and cable, DB-9M to
            3 x 12AWG RS485 cable, 8 ft.
            5034-214
            Non-isolated RS232-to-RS485 serial port converter,
            RS232 port-powered, DB-9F to DB-9F.
            Connection Diagram
            See following page.
            Configuration Software ◆ USB-to-RS232 Adapter ◆ RS232-to-RS485 Adapter ◆ Interface Cable
            Model 900C-SIP Configuration Software Interface Package
            Series 900MB Modbus RTU I/O
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2009. Data subject to change without notice. Printed in USA 6/2010.
            Series 900MB Modbus RTU I/O
            RS-232
            RS-485
            900C-SIP COMMUNICATION CONNECTIONS
            6 FEET OF CABLE
            USB MALE
            DB9 MALE
            RS232
            USB SERIAL CONVERTER 4001-095
            LED
            TO HOST USB PORT
            OR
            HOST
            USB
            TO HOST RS232 SERIAL PORT
            HOST
            RS232
            DB9
            MALE
            HOST RS232 SERIAL
            PORT CONNECTOR OR
            USB CONNECTOR AT
            BACK OF PC
            CONNECT THE RS232
            SIDE OF CONVERTER
            TO THE PC
            CONNECT THE RS485
            SIDE OF CONVERTER
            TO THE CABLE
            RS232 TO RS485 SERIAL
            CONVERTER
            (MODEL 5034-214)
            DB9 FEMALE DB9 FEMALE
            PC RUNNING
            ACROMAG
            MODBUS CONFIG
            SOFTWARE
            INSTALL MODBUS CONFIGURATION SOFTWARE
            WINDOWS-BASED PERSONAL COMPUTER
            THE RS232-to-RS45 PORT-POWERED CONVERTER 5034-214
            IS INTENDED FOR CONFIGURATION PURPOSES FOR ONE
            DEVICE. IT IS NOT SUITABLE FOR DRIVING A FULLY LOADED
            RS485 NETWORK. THE USE OF AN EXTERNALLY POWERED
            RS485 CONVERTER IS RECOMMENDED FOR DRIVING MULTIPLE
            DEVICES OF AN RS485 NETWORK.
            2
            0
            R
            ST
            TB1
            12
            45 44
            15
            42 41
            TB2
            23
            34
            B
            C
            26
            31
            DFT
            D
            D D
            A
            B
            A
            TB4
            TB3
            3
            1
            RUN
            11 13 14
            46 43
            22 21
            36 35
            25
            32
            TB1
            Acromag
            RS-232
            TB1
            RS485
            TB4
            COM
            A
            TB2
            PWR
            B
            TB3
            RS-485
            RED
            COM
            D
            D
            RS-485
            TB4
            COM
            COM
            16 24
            33
            5034-202
            STATUS LED (YELLOW)
            RUN/PWR LED (GREEN)
            D
            C
            WIRE
            CABLE 5034-202
            ANY 900MB MODULE
            GREEN
            BLACK
            CONNECT WIRES AS SHOWN
            COLOR
            ANY 900MB MODULE
            CONNECT THE RS232
            SIDE OF CONVERTER
            TO THE PC
            CONNECT THE RS485
            SIDE OF CONVERTER
            TO THE CABLE
            RS232 TO RS485 SERIAL
            CONVERTER
            (MODEL 5034-214)
            CAUTION: DO NOT CONNECT THE
            CABLE DIRECTLY TO THE PC WITHOUT
            THE CONVERTER, OR DAMAGE TO
            THE MODULE MAY RESULT.
            DEFAULT MODE SWITCH -
            PUSH FOR DEFAULT MODE
            STATUS LED FLASHES IN
            DEFAULT MODE
            REFER TO THE USER'S MANUAL
            THAT CAME WITH YOUR MODULE
            TO COMPLETE THE MODULE'S
            POWER AND I/O CONNECTIONS
            DB9 MALE
            DB9 FEMALE DB9 FEMALE
            BusWorks ? I/O Modules
            for Profibus-DP
            Acromag’s BusWorks 900PB series is a
            high-performance line of network-ready
            analog and discrete I/O modules. They
            feature universal input/output ranges and
            an inligent microcontroller to provide
            extreme flexibility and powerful monitor-
            ing and control capabilities. Select from a
            variety of analog and discrete I/O models
            to meet your application requirements.
            Each module provides a direct network
            interface for your I/O signals. Unlike
            “block I/O” devices that combine large,
            expensive processor blocks with snap-on
            I/O terminal blocks, 900PB modules
            handle the network interface and I/O
            processing in one, compact multi-channel
            module. This space-saving approach is
            very cost-effective for systems that need
            to add a small quantity of I/O channels at
            existing control sites or network to new
            remote sites.
            To ensure high performance, modules
            feature an advanced microcontroller
            technology. On-board address switches
            and automatic baud rate detection (up
            to 12 Mbps) simplify installation. Four-
            way isolation prevents ground loops and
            increases noise immunity. Indicator LEDs
            and self-diagnostics help you quickly
            catch problems.
            Inputs
            ? Thermocouple ? DC current/voltage
            ? RTD/resistance ? AC current
            ? Millivolt ? Discrete level/status
            Outputs
            ? DC voltage
            ? DC current
            ? Discrete switches
            Power
            ? 12-36V DC
            Approvals
            ? Profibus PNO, CE, UL/cUL Class I Div 2
            For more information, visit our website at
            /profibus
            12
            Save up to 50%
            compared to block
            and modular I/O
            systems. Acromag’s
            BusWorks ? modules
            do not require special
            buscouplers, racks, or
            power supplies.
            Call 877-214-6267 or 248-295-0880 for technical assistance.
            PROFIBUS-DP: REMOTE I/O
            961PB, 962PB
            Analog Input:
            6-Channel
            Differential Input:
            DC Current or
            DC Voltage Signals
            Models
            961PB: 6 DC current input channels
            962PB: 6 DC voltage input channels
            I Description
            These modules provide an isolated Profibus-DP
            network interface for six analog input channels.
            Differential inputs eliminate ground loops and
            thus the need for isolators in many applications.
            Multi-range inputs accept signals from a variety of
            sensor and devices. High-resolution, low noise,
            A/D converters deliver high accuracy and reliability.
            Input Ranges
            DC Current (user-selectable ranges)
            0 to 1mA, 0 to 11mA, 0 to 20mA, 4 to 20mA
            0 to 20 amps AC (with optional AC sensor)
            DC Voltage (user-selectable ranges)
            ±78mV to ±10V DC (eight range options)
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            12 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 6-input stand-alone module is very economical
            I Differential inputs eliminate ground loops
            I Universal inputs support a variety of sensors
            I High-resolution 16-bit Σ?? A/D converters
            ensure precise, high accuracy measurements
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            I Input
            Configuration
            Input ranges are selectable for a 3-channel group.
            Accuracy
            Better than ±0.05% of span for nominal input ranges.
            Analog to Digital Converter (A/D)
            16-bit Σ?? converter.
            Resolution
            0.005% or 1 part in 20000.
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz.
            Common Mode: Better than 140dB @ 60Hz.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            DC Current Input impedance
            24.9 ohms.
            DC Voltage Input impedance
            Greater than 110.5K ohms.
            I Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158°F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            I Ordering Info
            Models
            961PB-2006
            DC current input module, 6 differential channels
            962PB-2006
            DC voltage input module, 6 differential channels
            NOTE: Modules include GSD files on CD-ROM.
            Accessories (see Page 48)
            5020-350
            AC current sensor. Used with 961PB DC current input
            models. One sensor per channel is required.
            See page 205.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            TBK-B03
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S03
            Optional terminal block kit, spring clamp style, 4 pcs.
            Profibus I/O BusWorks ?
             
            41
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            C
            PROFIBUS
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            46
            IN5-
            45
            IN5+
            IN0-
            43
            IN4+
            IN1+
            42
            TB4
            TB2
            IN2+
            IN3+
            IN3-
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            IN0+
            IN1-
            44 41
            TB2
            IN2-
            TB3
            13 16
            IN4-
            21 24
            INPUTS 0, 1
            TB4
            INPUTS 4, 5
            4.35
            (110.5)
            3.90
            (99.1)
            DC-
            32
            DC+
            31 33 LSD MSD
            PWR
            SLAVE
            ADDRESS
            (HEX)
            INPUTS 2, 3
            Profibus I/O BusWorks ?
            963/964PB
            Analog Input:
            12-Channel
            Single-Ended Input:
            DC Current or
            DC Voltage Signals
            Models
            963PB: 12 DC current input channels
            964PB: 12 DC voltage input channels
            I Description
            These modules provide an isolated Profibus-DP
            network interface for twelve analog input chan-
            nels. Compact design saves space and lowers
            system costs. Multi-range inputs accept signals
            from a variety of sensors and devices. High-
            resolution, low noise, A/D converters deliver
            high accuracy and reliability.
            Input Ranges
            DC Current (user-selectable ranges)
            0 to 1mA, 0 to 11mA, 0 to 20mA, 4 to 20mA
            0 to 20 amps AC (with optional AC sensor)
            DC Voltage (user-selectable ranges)
            ±1V, ±5V, or ±10V DC
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            12 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 12-input module has very low cost per channel
            I Universal DC inputs support a wide variety of
            industrial sensors and signals
            I High-resolution 16-bit Σ?? A/D converters
            ensure precise, high accuracy measurements
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            I Input
            Configuration
            Input ranges are selectable on each terminal block for
            a group of four input channels (4-channel basis).
            Accuracy
            Better than ±0.05% of span for nominal input ranges.
            Analog to Digital Converter (A/D)
            16-bit Σ?? converter.
            Resolution
            0.005% or 1 part in 20000, typical.
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz.
            Common Mode: Better than 140dB @ 60Hz.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            DC Current Input impedance
            49.9 ohms.
            DC Voltage Input impedance
            Greater than 110.5K ohms.
            I Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158°F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            Inputs share a common.
            I Ordering Info
            Models
            963PB-2012
            DC current input module, 12 single-ended channels
            964PB-2012
            DC voltage input module, 12 single-ended channels
            NOTE: Modules include GSD files on CD-ROM.
            Accessories
            5020-350
            AC current sensor. Used with 963PB DC current input
            models. One sensor per channel is required.
            See page 205.
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            TBK-B03
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S03
            Optional terminal block kit, spring clamp style, 4 pcs.
             
            42
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            C
            PROFIBUS
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            IN00
            46
            RTN
            IN01
            45
            IN11
            IN02
            43
            RTN
            IN03
            42
            IN09
            TB4
            TB2
            IN05
            RTN
            IN07 DC-
            32
            RTN DC+
            31
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            RTN
            RTN
            44 41
            TB2
            IN04
            IN06
            33 LSD MSD
            TB3
            13 16
            IN10
            IN08
            21 24
            ANALOG INPUTS: 4-7 ANALOG INPUTS: 0-3
            TB4
            PWR ANALOG INPUTS: 8-11
            4.35
            (110.5)
            3.90
            (99.1)
            SLAVE
            ADDRESS
            (HEX)
            Profibus I/O BusWorks ?
            965PB
            Analog Input:
            4 or 6-Channel Input:
            Thermocouple or
            Millivolt Signals
            I Description
            These modules provide an isolated Profibus-DP
            network interface for up to six input channels.
            Differential inputs eliminate ground noise and
            each terminal block includes a cold junction
            compensation (CJC) sensor for more precise
            temperature measurements. Multi-range inputs
            accept signals from a variety of sensors and
            devices. High-resolution, low noise, A/D
            converters deliver high accuracy and reliability.
            Input Ranges
            Thermocouple (user-selectable type)
            Type J, K, T, R, S, E, B, or N
            DC Millivolts (user-selectable range)
            ±100mV or ±1V DC
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            12 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 6-input stand-alone module is very economical
            I Universal inputs support a variety of sensors
            I Built-in CJC sensor on each terminal block pro-
            duces more precise temperature measurements
            I Thermocouple break detection (upscale or
            downscale) identifies sensor wiring failures
            I High-resolution 16-bit Σ?? A/D converters
            ensure precise, high accuracy measurements
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            I Input
            Configuration
            Input ranges are selectable for a 3-channel group.
            Accuracy
            Input Input Range Accuracy (typical)
            Type J -210 to 760°C ±0.5°C
            Type K -200 to 1372°C ±0.5°C
            Type T -260 to 400°C ±0.5°C
            Type R -50 to 1768°C ±1.0°C
            Type S -50 to 1768°C ±1.0°C
            Type E -200 to 1000°C ±0.5°C
            Type B 260 to 1820°C ±1.0°C
            Type N -230 to -170°C ±1.0°C
            Type N -170 to 1300°C ±0.5°C
            Voltage ±100mV or ±1V DC ±0.1% of span
            Cold Junction Compensation (CJC) Accuracy
            ±0.5°C.
            Thermocouple Break Detection
            Upscale or downscale selection applies to all channels.
            Analog to Digital Converter (A/D)
            16-bit Σ?? converter.
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz.
            Common Mode: Better than 140dB @ 60Hz.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            I Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158°F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            I Ordering Info
            Models
            965PB-2004
            4-channel thermocouple/millivolt input module
            965PB-2006
            6-channel thermocouple/millivolt input module
            NOTE: Modules include GSD files on CD-ROM.
            Accessories (see Page 48)
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
             
            43
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            C
            PROFIBUS
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            46
            IN5-
            45
            IN5+
            IN0-
            43
            IN4+
            IN1+
            42
            TB4
            TB2
            IN2+
            IN3+
            IN3-
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            IN0+
            IN1-
            44 41
            TB2
            IN2-
            TB3
            13 16
            IN4-
            21 24
            CJC-0 INPUTS 0, 1
            TB4
            INPUTS 4, 5 CJC-2
            4.35
            (110.5)
            3.90
            (99.1)
            DC-
            32
            DC+
            31 33 LSD MSD
            PWR
            SLAVE
            ADDRESS
            (HEX)
            (Model 965PB-2006 only)
            CJC-1 INPUTS 2, 3
            Profibus I/O BusWorks ?
            966PB
            Analog Input:
            4 or 6-Channel Input:
            RTD or Resistance
            Signals
            I Description
            These modules provide an isolated Profibus-DP
            network interface for up to six input channels.
            Multi-range inputs accept signals from a variety
            of sensors and devices. High-resolution, low
            noise, A/D converters deliver high accuracy and
            reliability. 3-way isolation further improves the
            system performance.
            Input Ranges
            RTD (user-selectable type)
            2-wire and 3-wire RTDs are supported.
            Platinum 100 ohm (alpha = 1.3850 or 1.3911)
            Nickel 120 ohm
            Copper 10 ohm
            Resistance
            0 to 500 ohms
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            12 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 6-input stand-alone module has much lower
            start-up cost than multi-piece block I/O systems
            I Versatile RTD or ohmic inputs support a wide
            variety of industrial sensors and devices
            I RTD break detection (upscale or downscale)
            identifies sensor wiring failures
            I High-resolution 16-bit Σ?? A/D converters
            ensure precise, high accuracy measurements
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            I Input
            Configuration
            Input ranges are selectable for a 3-channel group.
            Accuracy
            Input Type Input Range Accuracy (typical)
            Pt 100 ohm -200 to 850°C ±0.25°C
            Ni 120 ohm -80 to 320°C ±0.25°C
            Cu 10 ohm -200 to 260°C ±1.25°C
            Resistance 0 to 500 ohms ±0.05 ohms
            RTD Break Detection
            Upscale or downscale selection applies to all channels.
            Analog to Digital Converter (A/D)
            16-bit Σ?? converter.
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz.
            Common Mode: Better than 130dB @ 60Hz.
            Input Filter Bandwidth
            -3dB at 3Hz, typical.
            Excitation Current
            1mA DC typical, all RTD types.
            I Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158°F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            Inputs share a common.
            I Ordering Info
            Models
            966PB-2004
            4-channel RTD/resistance input module
            966PB-2006
            6-channel RTD/resistance input module
            NOTE: Modules include GSD files on CD-ROM.
            Accessories (see Page 48)
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            TBK-B03
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S03
            Optional terminal block kit, spring clamp style, 4 pcs.
             
            44
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            C
            PROFIBUS
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            46
            IN5L
            45
            IN5-
            IN1+
            43
            IN4L
            IN1-
            42
            TB4
            TB2
            IN2L
            IN3-
            IN3L
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            IN0L
            IN1L
            44 41
            TB2
            IN3+
            TB3
            13 16
            IN5+
            21 24
            RTD INPUTS 0, 1
            TB4
            RTD INPUTS 4, 5
            4.35
            (110.5)
            3.90
            (99.1)
            DC-
            32
            DC+
            31 33 LSD MSD
            PWR
            SLAVE
            ADDRESS
            (HEX)
            RTD INPUTS 2, 3
            (966PB-2006 only)
            IN4-
            IN4+
            LRTN
            IN0-
            IN0+
            IN2-
            IN2+
            Profibus I/O BusWorks ?
            972/973PB
            Analog Output:
            4 or 6-Channel Output:
            DC Current or
            DC Voltage Signals
            Models
            972PB: DC current output channels
            973PB: DC voltage output channels
            I Description
            These modules provide up to six channels of
            analog output. Multi-range outputs support a
            wide variety of industrial devices. They can drive
            displays and recorders, control drives, or send
            analog signals to other systems. High-resolution,
            low noise, D/A converters deliver high accuracy
            and reliability. 3-way isolation further improves
            system performance.
            Output Ranges
            DC Current (user-selectable ranges)
            0 to 1mA, 0 to 20mA, or 4 to 20mA
            DC Voltage (user-selectable ranges)
            0 to 1V, 0 to 5V, or 0 to 10V DC
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            16 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 6-input stand-alone module has much lower
            start-up cost than multi-piece block I/O systems
            I Universal DC outputs support a wide variety of
            signals and industrial devices
            I Three selectable failsafe modes (0%, last-state,
            or pre-defined) help prevent unsafe conditions
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            Configuration
            Output ranges are selectable on a channel to channel
            basis.
            I Output
            Accuracy
            Better than ±0.1% of span, typical.
            1.6% for 0 to 1mA range. 0.8% for 0 to 1V range.
            Digital to Analog Converter (D/A)
            12-bit converter.
            Current Output Compliance
            12V minimum, 13V typical.
            Current Output Load Resistance Range
            0 to 625 ohms, typical.
            Voltage Output Source Current
            0 to 10mA DC, maximum.
            I Environmental
            Ambient Temperature
            Operating:
            972PB-200x models -25 to 60°C (-13 to 158°F).
            973PB-200x models: -25 to 70°C (-13 to 140°F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            Outputs share a common.
            I Ordering Info
            Models
            972PB-2004
            DC current output module, 4 channels
            972PB-2006
            DC current output module, 6 channels
            973PB-2004
            DC voltage output module, 4 channels
            973PB-2006
            DC voltage output module, 6 channels
            NOTE: Modules include GSD files on CD-ROM.
            Accessories (see Page 48)
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            TBK-B03
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S03
            Optional terminal block kit, spring clamp style, 4 pcs.
             
            45
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            C
            PROFIBUS
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            RTN
            V2+
            TB2
            RTN
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            V1+
            RTN
            TB2
            RTN
            TB3
            13 16 21 24
            ANALOG OUTPUTS
            4.35
            (110.5)
            3.90
            (99.1)
            DC-
            32
            DC+
            31 33 LSD MSD
            PWR
            SLAVE
            ADDRESS
            (HEX)
            ANALOG OUTPUTS
            RTN
            V0+
            RTN
            V3+
            Profibus I/O BusWorks ?
            981/982/983PB
            Discrete I/O:
            12-Channel I/O:
            Active-Low Inputs,
            Sinking Outputs
            (Low-Side Switching)
            Models
            981PB: 12 input channels
            982PB: 12 output channels
            983PB: 12 input/output channels
            I Description
            These modules provide an isolated Profibus-DP
            network interface for twelve discrete input
            and/or output channels. The outputs provide
            direct on/off, high/low, or open/close control of
            industrial devices. The inputs sense the status of
            motors, pumps, valves and other equipment. The
            983PB model with tandem I/O provides output
            level control and status verification in one unit.
            Input Range
            0 to 35V DC
            Output Range
            0 to 35V DC
            Network Communication
            Profibus-DP, RS-485 network up to 12Mbaud
            Power Requirement
            12 to 36V DC supply required
            Approvals
            Profibus PNO certified.
            CE marked. UL, cUL listed.
            Class I; Division 2; Groups A, B, C, D.
            I Special Features
            I Standard Profibus-DP network communication
            with industry-standard ASIC (Siemens SPC3)
            I 12-channel stand-alone module has far lower
            start-up cost than multi-piece block I/O systems
            I 0-35V DC solid-state logic interface can
            monitor or control a wide variety of devices
            I Bidirectional I/O models facilitate loopback
            monitoring of the output state
            I Socketed SIP resistors provide input and output
            5.6K ohm pull-ups to the excitation supply
            I Three selectable failsafe modes (off, last-state,
            or pre-defined) help prevent unsafe conditions
            I Compact packaging with pluggable terminals
            saves space and simplifies wiring
            I Wide operational temperature range permits
            installation in extreme environments
            I Performance
            I General Specifications
            See Page 47 for communication and other specs.
            I Input  (981 & 983 models)
            Input Type
            Twelve active-low, buffered inputs, with a common
            connection. Built-in 5.6K ohm pullups to excitation
            terminal socketed for 4-channel groups.
            Input Signal Voltage Range
            0 to 35V DC, maximum.
            Input Impedance
            100K ohms, typical.
            Input Signal Threshold
            TTL compatible with 100mV of hysteresis, typical.
            I Output  (982 & 983 models)
            Output Type
            12 independent, open-drain, DMOS MOSFET switches.
            Output Voltage Range
            0 to 35V DC max. (0 to 500mA/channel continuous).
            Output ON Resistance
            0.28 ohms maximum.
            I Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158F).
            Storage: -40 to 85°C (-40 to 185°F).
            Relative Humidity
            5 to 95%, non-condensing.
            Isolation
            1500V AC for 60 seconds or 250V AC continuous.
            3-way isolation between I/O, network, and power.
            I Ordering
            Information
            Models
            981PB-2012
            Discrete input module, 12 channels
            982PB-2012
            Discrete output module, 12 channels
            983PB-2012
            Discrete input/output module, 12 channels
            NOTE: Modules include GSD files on CD-ROM.
            Accessories (see Page 48)
            PS5R-D24
            Power supply (24V DC, 2.1A).
            See Power Supplies on Page 199.
            TBK-B03
            Optional terminal block kit, barrier strip style, 4 pcs.
            TBK-S03
            Optional terminal block kit, spring clamp style, 4 pcs.
             
            46
            9 0 0 P B S e r i e s
            Profibus-DP / RS485
            L
            9 8
            5 4
            1 0
            11
            7 6
            3 2
            C
            PROFIBUS
            10
            RUN BUS
            Acromag
            2.34
            (59.4)
            1.05
            (26.7)
            CH. I/O STATUS
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            3.75
            (95.3)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            4.68
            (118.9)
            EXC1
            46
            RTN
            CH 0
            45
            CH11
            CH 2
            43
            CH 9
            CH 3
            42
            CH 8
            TB4
            TB2
            CH 4
            CH 5
            CH 7
            RTN
            11 12 14 15 22 23 25 26
            TB3
            TB1
            TB1
            CH 1
            RTN
            44 41
            TB2
            EXC2
            CH 6
            TB3
            13 16
            CH10
            EXC3
            21 24
            DIGITAL IN or OUT DIGITAL IN or OUT
            TB4
            DIGITAL IN or OUT
            4.35
            (110.5)
            3.90
            (99.1)
            DC-
            32
            DC+
            31 33 LSD MSD
            PWR
            SLAVE
            ADDRESS
            (HEX)
            Profibus I/O BusWorks ?
            The following specifications are common to all
            900PB Series I/O modules.
            I Communication
            Interface Standard
            Isolated, 3-wire RS-485 multi-drop, half-duplex,
            asynchronous.
            Command/Response Protocol
            Standard ProfiBus DP (Master/Slave) protocol per
            European Norm EN50170.
            Baud Rate
            Supports rates of 9600, 19.2K, 44.45K, 93.75K, 187.5K,
            500K, 1.5M, and 12M bits per second, auto-detected.
            Communication Distance
            Up to 1200 meters without a repeater using Type A
            wire (<30pF/m).
            1200m @ 115Kbps or less
            1000m @ 187.5Kbps
            400m @ 500Kbps
            200m @ 1.5Mbps
            100m @ 12Mbps
            Address
            Set via two rotary hexadecimal switches or via the Set
            Slave Address command. Valid setting is 0-125.
            Address 126 (7EH) is factory default address.
            Maximum Message Size
            Up to 32 bytes recommended, extendable up to 244
            bytes of data/node/message, plus 11 bytes of over-
            head (data frame).
            Network Capacity
            Multi-drop up to 31 modules, plus a host, without a
            repeater. Up to 125 modules plus a host if four
            repeaters are used (one for every 31 nodes).
            I Environmental
            Isolation
            I/O channel, power, and network circuits are isolated
            from each other for common-mode voltages up to
            250VAC, or 354V DC off DC power ground, on a
            continuous basis (will withstand 1500VAC dielectric
            strength test for one minute without breakdown).
            Complies with test requirements of ANSI/ISA-82.01-
            1988 for voltage rating specified.
            I Electromagnetic
            Compatibility (EMC)
            Immunity per European Norm EN50082-1.
            Emissions per European Norm EN50081-1.
            Electrostatic Discharge (ESD) Immunity
            Per EN61000-4-2.
            Radiated Field Immunity (RFI)
            Per EN61000-4-3 and ENV50204.
            Electrical Fast Transient Immunity (EFT)
            Per EN61000-4-4.
            Conducted RF Immunity (CRFI)
            Per EN61000-4-6.
            Surge Immunity
            Per EN61000-4-5.
            Radiated Frequency Emissions
            Per EN55022 Class B.
             
            47
            9 0 0 P B S e r i e s
            on
            off
            RUN RUN BUS
            RUN BUS
            on
            BUS
            on
            off
            BUS
            on
            RUN
            on
            off
            RUN
            off off
            500Kbps
            19.2Kbps
            400M
            1200M
            NODE 32'
            PROFIBUS
            BUS
            on
            off
            PROFIBUS
            on
            RUN
            PROFIBUS
            RUN
            BUS
            PROFIBUS
            BUS
            12Mbps
            9600bps
            93.75Kbps
            187.5Kbps
            100M
            1200M
            1000M
            1200M
            RS485 SIGNAL
            REPEATER
            off
            1
            PROFIBUS PROFIBUS PROFIBUS
            1.5Mbps
            BAUD
            200M
            LENGTH
            61
            NODE 2'
            NODE 5 NODE 31
            NETWORK LENGTH PER
            BAUD RATE w/ TYPE A
            PROFIBUS CABLE
            END OF NETWORK
            (TERMINATION ON)
            TERMINATION
            SWITCH
            NODE 2
            NODE 1
            START OF NETWORK
            (TERMINATION REQD)
            PROFIBUS MASTER
            PLUG-IN CARD
            INSTALLED IN PC.
            START OF SEGMENT
            (TERMINATION ON)
            NODE 32 NODE 1'
            2
            NODE 4 NODE 3
            3
            31
            SEGMENT 2 (UP TO 1200 METERS,
            UP TO 32 NODES PER SEGMENT)
            4 30
            SEGMENT 1 (UP TO 1200 METERS, UP TO 32 NODES PER SEGMENT)
            END OF SEGMENT
            (TERMINATION ON)
            NOTE: THE PROFIBUS CONNECTORS SHOWN HAVE
            A TERMINATION NETWORK BUILT-IN. WITH
            TERMINATION ON, THE OUTGOING CABLE IS
            DISCONNECTED FROM NETWORK. SWITCH
            TERMINATION ON ONLY AT THE BEGINNING AND
            END OF A NETWORK OR NETWORK SEGMENT.
            PROFIBUS MASTER - A
            HOST PC WITH PROFIBUS
            CARD INSTALLED AND
            RUNNING APPLICATION
            SOFTWARE.
            PROFIBUS RS485 NETWORK
            A network segment may contain up to 32 nodes without the use of a signal repeater.
            Transmission distance is up to 1200 meters per segment without a repeater.
            A 120 ohm termination resistor must be placed at both ends of a network or network-segment.
            The total number of nodes and total distance may be extended by using signal repeater(s).
            The maximum number of modules possible is further limited by the address range from 0 to 125.
            General Operation and Performance Specifications
            Profibus I/O BusWorks ?
            Accessories
             
            48
            9 0 0 P B S e r i e s
            I Ordering Information
            5020-350
            AC current sensor (See page 205)
            Barrier strip (left) and spring clamp (right).
            I Ordering Information
            See individual I/O modules for compatibility.
            Terminal Blocks
            AC Current Sensor
            50W Supply
            Input Power Requirement
            85 to 264V AC or 105 to 370V DC
            Output
            24V DC, 2.1A (50W)
            I Ordering Information
            PS5R-D24
            Universal 50W power supply
            See Power Supplies on Page 199 for other models
            and more information.
            DIN-Rail Mounting
            For your convenience, Acromag offers several
            mounting accessories to simplify your system
            installation. Our 19” rack-mount kit provides a
            clean solution for mounting your I/O modules
            and a power supply. Or you can buy precut DIN
            rail strips for mounting on any flat surface.
            I Ordering Information
            20RM-16-DIN
            19" rack-mount kit with DIN rail.
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T, 3 inches (75mm) or
            16.7 inches (425mm)
            3-position:
            L = 0.66 inches (16.9 mm)
            6-position:
            L = 1.26 inches (32.3 mm)
            Spring Clamp Terminal Blocks
            Barrier Strip Terminal Blocks
            TBK-B01
            Terminal block kit,
            two 6-position pieces
            TBK-B02
            Terminal block kit,
            four 6-position pieces
            TBK-B03
            Terminal block kit,
            one 3-position and
            three 6-position pieces
            3-position: L = 0.87 inches (22.3 mm)
            6-position: L = 1.47 inches (37.7 mm)
            Wire range:
            AWG #12-26
            Wire range:
            AWG #12-26
            Wire range:
            AWG #12-26
            TBK-S01
            Terminal block kit,
            two 6-position pieces
            TBK-S02
            Terminal block kit,
            four 6-position pieces
            TBK-S03
            Terminal block kit,
            one 3-position and
            three 6-position pieces
            Mounting Hardware Power Supplies
            600T Series
            Isolated Transmitters
            611T, 612T . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
            631T, 632T, 633T . . . . . . . . . . . . . . . . . . . . . . . . . . 4
            651T, 652T, 653T . . . . . . . . . . . . . . . . . . . . . . . . . . 6
            654T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
            655T, 656T, 653T . . . . . . . . . . . . . . . . . . . . . . . . . 10
            657T, 658T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
            670T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
            Technical Documentation
            Dimensions diagrams . . . . . . . . . .see individual units
            Application notes . . . . . . . . . . . . . . . . . . . . . Page 16
            Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
            ◆ 650T Units (2-wire) ◆ 630T Units (4-wire) ◆ 610T Unites (4-wire)
            600T Series Models by Function Guide
            610T  630T  650T  670T
            Functions
            4-20mA isolator  x  x
            Isolated signal converter/transmitter  x  x
            Signal splitter  x  x
            Channel Configurations
            Single channel units  x  x  x  x
            Dual channel units  x  x  x  x
            Quad channel units  x
            Splitter (one input, two outputs)  x  x
            Power Configurations
            Input loop-powered  x
            Output loop-powered (2-wire transmitter)  x
            AC-powered  x
            DC-powered  x  x
            Inputs
            DC voltage input  x  x
            DC current input  x  x  x  x
            Thermocouple/millivolt input  x
            RTD/resistance input  x
            AC current input  x
            Outputs
            DC current  x  x  x  x
            DC voltage  x
            Isolation Configurations
            Input from output/power  x  x
            Output from input/power  x  x
            3-way (input/output/power)  x  x
            Multi-channel, DC-powered isolated transmitters.
            Designed For high-density panel installations.
            Multi-channel AC/DC powered isolators. Provides
            excitation supply for 2-wire transmitters.
            Multi-channel, output loop-powered transmitters with
            input isolation. Designed to front-end PLC inputs.
            Multi-channel, input loop-powered transmitters with
            output isolation. Designed to isolate PLC outputs to
            field devices.
            ◆ 670T Unites (2-wire)
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 1 –
            Description
            Models
            611T: Single I/O channel
            612T: Dual I/O channel
            These units receive DC current or voltage input
            signals, provide isolation, and output proportion-
            al DC current or voltage signals . With support for
            universal DC I/O ranges, 610T series transmitters
            provide a solution for a wide variety of isolation
            and signal conversion tasks . The single-channel
            611T and dual-channel 612T are ideal for panel
            shops and end-users who require a high-density
            signal conditioner that can accomodate a broad
            range of instrumentation applications .
            Installation is fast and simple with Acromag’s
            built-in auto-configuration feature . Using your
            standard calibrator, the 610T’s internal microcon-
            troller automatically senses the input source type
            (voltage or current) and selects the optimum per-
            formance range for your zero and full-scale input
            values . To adjust your output values, simply push
            the up or down buttons on the front panel until
            you read the desired output signal on your meter .
            Both models provide high-voltage isolation
            between the input, output and power (3-way) .
            On dual channel units, each channel operates
            independently, with inputs isolated from each
            other, to prevent interaction between channels .
            For easy troubleshooting, each channel has diag-
            nostic LEDs to identify input over/under range
            conditions . An additional status LED indicates the
            unit is operating properly or that the front panel
            pushbutton lockout feature has been invoked .
            Input Ranges
            Universal input with automatic configuration
            ±100mA (self-ranging),
            ±100V DC (self-ranging),
            0 to 20 amps AC (with optional sensor)
            Output Ranges
            Universal output (user-configured ranges)
            0 to 20mA (full range capability),
            0 to 10V DC (full range capability)
            Power Requirement
            10 to 36V DC
            Approvals
            CE marked . UL, cUL listed .
            Key Features & Benefits
            ■ Universal DC input and output ranges offer
            flexibility to fit many applications .
            ■ Auto-configuration and self-ranging technolo-
            gies speed installation without pots, switches,
            jumpers, or software .
            ■ Optical isolation eliminates ground loops,
            reduces noise, and blocks transient signals .
            ■ Push-button calibration simplifies field
            adjustments for faster and easier maintenance .
            ■ Configuration lockout safety feature prevents
            tampering and accidental changes .
            ■ Reverse-acting output capability enables
            inverse proportional control signals .
            ■ Each input channel can drive two outputs
            (a voltage and a current output signal) .
            ■ Dual channel model saves space and reduces
            equipment costs .
            ■ High-resolution S-D A/D converters deliver
            superior accuracy for reliable measurements .
            DC current or voltage input ◆ Single/dual-channel DC-powered transmitters
            611T, 612T Multi-Channel, Universal DC I/O
            IN 1
            OUT 1
            OUT 2
            PWR
            PLC / DCS 612T
            3-way
            optical
            isolation
            V+/I+
            RTN
            IN 2
            V+/I+
            RTN
            V+/I+
            RTN
            V+/I+
            RTN
            DC+
            DC –
            R LOAD
            R LOAD
            Input
            Input
            +

            +

            DIN EN 50022, 35mm
            "T" RAIL DIN MOUNTING
            (59.4)
            2.34
            C
            L
            (95.3)
            3.75
            R
            1.05
            (26.7)
            1.05
            (26.7)
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            (118.9)
            4.68
            (99.1)
            3.90
            4.35
            (110.5)
            11 12 13 14 15 16 21 22 23 24 25 26
            TB1
            TB2
            TB1
            TB4
            34 33 32 31 36 35
            OUTPUT 2 OUTPUT 1
            43 42 41 46 45 44
            612T-0500 only
            TB1 TB2
            612T-0500
            only
            RUN
            MODE
            1
            ST
            SET
            CH
            2
            TB4 TB3
            RTN
            V+
            I+
            RTN
            V+
            I+
            TB3
            TB4
            DC+
            DC-
            Power
            INPUT 1 INPUT 2
            RTN
            I+
            JMP
            JMP
            V+
            RTN
            I+
            JMP
            JMP
            V+
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 2 –
            Performance Specifications
            ◆ General Input
            Analog to Digital Converter (ADC)
            16-bit S-D A/D converter .
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz .
            Common Mode: Better than 100dB @ 60Hz .
            Input Overvoltage Protection
            Bipolar Transient Voltage Suppressors (TVS) .
            ◆ DC Current Input
            DC Current Input Range
            ±100mA DC with full range capability .
            Minimum recommended span is ±4mA .
            DC Current Input Impedance
            10 ohms .
            DC Current Input Accuracy
            Better than ±0 .1% of output span .
            ◆ DC Voltage Input
            DC Voltage Input Range
            ±100V DC with full range capability .
            Minimum recommended span is ±40mV .
            Input impedance
            ±1V to ±100V input: greater than 100K ohms .
            ±40mV to ±1V input: 1K ohm
            DC Voltage Input Accuracy
            Better than ±0 .1% of output span .
            ◆ AC Current Input
            AC Current Input Range (optional)
            An optional external AC current sensor is required to
            monitor AC current signals (Model 5020-350) .
            AC Current Range  Primary Turns
            0 to 20A AC  1
            0 to 10A AC  2
            0 to 5A AC  4
            0 to 2A AC  10
            0 to 1A AC  20
            AC Current Input Accuracy
            Better than ±0 .5% of output span .
            ◆ Output (DC V/mA)
            Current Output
            Range: 0 to 20mA maximum (user-configured range) .
            Compliance: 11V DC typical .
            Load resistance range: 0 to 550 ohms .
            Voltage Output
            Ranges: 0 to 10V maximum (user-configured range) .
            Compliance: 10mA max . with short circuit protection .
            Output impedance: 1 ohms .
            Accuracy (overall input to output)
            Better than ±0 .1% of span for nominal output ranges
            of 0 to 10V or 0 to 20mA .
            Ambient Temperature Effect
            Better than ±0 .018% of output span per °C or ±1μV,
            whichever is greater .
            Output Response Time (for input step change)
            800mS typical to 98% of final output value .
            ◆ Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158°F) .
            Storage: -40 to 85°C (-40 to 185°F) .
            Relative Humidity
            5 to 95%, noncondensing .
            Power Requirements
            611T: 10 to 36V DC . 24V DC @ 55mA .
            612T: 10 to 36V DC . 24V DC @ 75mA .
            Isolation
            3-way (input/output/power) . 1500V AC for 60 seconds
            or 250V AC continuous . Dual channel model includes
            input-to-input isolation and outputs share a common .
            Radiated Field Immunity (RFI)
            Complies with EN61000-4-3 Level 3 and EN50082-1 .
            Electromagnetic Field Immunity (EMI)
            Less than ±0 .25% of output span effect .
            Electrical Fast Transient (EFT)
            Complies with EN61000-4-4 Level 3 and EN50082-1 .
            Surge Withstanding Capability (SWC)
            Complies with EN61000-4-5 Level 3 and EN50082-1 .
            Electrostatic Discharge (ESD)
            Complies with EN61000-4-2 Level 3 and EN50082-1 .
            Radiated Emissions
            Meets or exceeds EN50081-1 for Class B equipment .
            Approvals
            CE marked, UL, cUL listed (USA, Canada) .
            UL3121 general product safety .
            ◆ Physical
            Enclosure
            Case: Self-extinguishing NYLON type 6 .6 polyamide
            thermoplastic UL94 V-2 NEMA Type 1 enclosure .
            Connectors (Removable Terminal Blocks)
            Wire Range: AWG #12-24 .
            Printed Circuit Boards
            Military grade FR-4 epoxy glass circuit board .
            Dimensions
            1 .05W x 4 .68H x 4 .35D inches .
            26 .7W x 118 .9H x 110 .5D millimeters .
            Shipping Weight
            1 pound (0 .45 Kg) packed .
            Ordering Information
            ◆ Models
            611T-0500
            Single channel isolated transmitter
            612T-0500
            Dual channel isolated transmitter
            Add “-C” suffix for optional factory configuration .
            ◆ Accessories (see Page 21)
            5020-350
            AC current sensor . See Page 20 for details .
            PS5R-SD24
            Power supply (24V DC, 2 .5A) .
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs .
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs .
            DIN RAIL 3.0 or DIN RAIL 16.7
            DIN rail strip, Type T, 3 in .(75mm) or 16 .7 in . (425mm)
            20RM-16-DIN
            19” rack-mount kit with DIN rail .
            Holds sixteen 610T series transmitters .
            AC Current Sensor
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 3 –
            631T, 632T, 633T Multi-Channel 4-Wire Isolators
            Description
            Models
            631T: Single I/O channel
            632T: Dual I/O channel
            633T: Single input, dual output (splitter)
            These units receive 4-20mA process current
            inputs and provide isolated 4-20mA output
            signals . Each channel operates independently and
            is isolated from the others to prevent
            interaction between channels . Galvanic isola-
            tion eliminates ground loops, reduces noise, and
            blocks transient signals .
            Units are shipped with factory calibration for
            quick installation . These isolators also automati-
            cally compensate for load resistance variations,
            so re-calibration is rarely necessary . However,
            adjustable zero and span trim pots are provided
            to ensure precise calibration for maintenance
            requirements and long term serviceability .
            These isolators generate a 24V input excitation
            supply suitable for powering one or two 2-wire
            transmitters . The supply is current limited at each
            output to prevent any excitation short from pull-
            ing down the internal power supply . The internal
            DC supply improves system performance by
            isolating loops on a single or dual channel basis .
            It saves space, complexity, and the expense of
            installing additional supplies to power your field
            loops .
            Input / Output Ranges
            4 to 20mA DC input
            4 to 20mA DC output
            Power Requirement
            15-36V DC
            90-250V AC (125V DC ±10%)
            Four-wire isolated transmitter
            Approvals
            CE marked . UL, cUL listed .
            Class I, Division 2, Groups A, B, C, D .
            Key Features & Benefits
            ■ Two channels in a single unit saves space and
            reduces costs .
            ■ Signal splitter model (633T) provides two iden-
            tical isolated outputs from one input signal .
            ■ Built-in isolated excitation supply with short
            circuit protection can drive up to two field
            2-wire process loops .
            ■ Full isolation safely separates each input
            channel, each output channel, the excitation
            supply, and power .
            ■ Excellent accuracy and stability ensure reliable
            operation in hostile environments .
            ■ Low input burden keeps voltage drop to less
            than 1 .5V for full-scale current .
            ■ Supports wide 0 to 1000 ohm load range and
            no trimming is required if the load varies .
            ■ Current limiting safely limits output to 27mA .
            ■ Pluggable terminals, zero/span trim pots and
            power LEDs make installation, maintenance,
            and long term service easy .
            DC current input ◆ Single/dual-channel AC/DC-powered isolators ◆ Signal splitter
            2-Wire
            Xmitter
            +

            Field
            Device
            IN 1
            IN 2
            OUT 1
            OUT 2
            PWR
            PLC / DCS
            632T
            IN +
            IN –
            EXC1
            EXC2
            IN+
            IN–
            +

            +

            +

            +

            R LOAD
            R LOAD
            Input
            Input
            +

            +

            4-20mA
            Limiter
            Limiter
            24V+
            RTN
            24V+
            RTN
            4-20mA Source
            4-20mA Sink
            TB1
            11
            46
            13
            44
            14
            43
            16
            41
            TB4
            36 35 33 32
            +24V OUT-
            IN+ IN-
            IN- IN+
            OUT- +24V
            TB4
            TB3
            C
            L
            ZERO
            12
            45
            15
            42 31 34
            SPAN
            PWR
            PWR
            3.75
            (95.3)
            TB1
            RTN
            EXC
            OUT+
            3.90
            (99.1)
            CHAN 1
            OUT+ RTN
            EXC
            POWER
            1.05
            (26.7)
            4.68
            (118.9)
            CHAN 2
            TB3
            2.34
            (59.4)
            "T" RAIL DIN MOUNTING
            DIN EN 50022, 35mm
            ZERO
            SPAN
            Acromag
            CHAN 2
            CHAN 1
            4.35
            (110.5)
            NOTE: Dimensions Are INCHES (MILLIMETERS).
            OUT-
            IN-
            IN+
            +24V
            OUT+
            RTN
            EXC CHAN 2 Input
            POWER
            GND
            L2
            L1
            GND
            DC-
            DC+
            +24V
            OUT-
            RTN
            EXC CHAN 1
            OUT+
            631T/632T
            633T
            633T
            632T
            63xT-0500 (DC)
            63xT-0100 (AC)
            Labeling shown
            for each model
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 4 –
            Performance Specifications
            Reference Test Conditions
            Input/output current 4 to 20mA; Output load 250
            ohms; Power 24V DC or 115V AC; 77°F (25°C) .
            Input Range
            4 to 20mA input (each channel) .
            Input Burden
            Voltage drop (631T, 632T):
            Less than 1 .5V (75 ohms) at full scale .
            Voltage drop (633T):
            Less than 3 .0V (150 ohms) at full scale .
            Input Overvoltage Protection
            Bipolar Transient Voltage Suppressors (TVS) .
            Input Excitation
            24V DC ±10%, 22mA maximum each . Fully isolated .
            Includes independent current limiting at EXC1 and
            EXC2 near 23mA, each .
            Output Range
            4-20mA DC output (each channel) .
            Output Trim Range
            Zero and full-scale adjustment to ±4% .
            Output Limiting
            Outputs are limited to 27mA .
            Output Load
            0 to 1000 ohms (631T) .
            0 to 950 ohms (632T, 633T) .
            Output Load Resistance Effect
            Less than ±0 .01% of output span effect for a ±100
            ohm change in load resistance .
            Output Response Time (for input step change)
            25mS typical to 98% of final output value .
            Accuracy
            ±0 .05% of output span . Error includes the combined
            effects of isolator repeatability, hysteresis, terminal
            point linearity and adjustment resolution .
            Temperature Drift
            Better than ±50ppm/°C (±0 .005%/°C) over the ambi-
            ent temperature range . This specification includes the
            combined effects of zero and span over temperature .
            Calibration
            Two 15-turn potentiometers (zero and span)
            per output channel, accessible from front of the unit .
            Bandwidth
            -3dB at 50Hz, typical with a 500 ohm load .
            Noise Rejection
            Common mode: Better than 100dB at 60Hz, typical .
            Normal mode: -6dB at 60Hz, typical, 500 ohm load .
            LED Indicators
            Green, one LED per output channel .
            Constant ON indicates power applied .
            ◆ Environmental
            Ambient Temperature
            Operating: -25 to 75°C (-13 to 167°F),
            [if excitation supplies are used on 632T or 633T
            -25 to 60°C (-13 to 140°F)]
            Storage: -40 to 85°C (-40 to 185°F)
            Relative Humidity
            5 to 95% .
            Power Requirement
            DC-powered units: 15-36V DC SELV .
            AC-powered units: 90-250V AC (125V DC ±10%)
            631T: 1 .5 watts without excitation, 2 .4 watts with
            excitation .
            632T, 633T: 3 .0 watts without excitation, 4 .8 watts
            with excitation .
            Isolation
            Inputs, outputs, individual channels, power, and
            excitation supplies are isolated from each other for
            common-mode voltages up to 250V AC, or 354V
            DC off ground, on a continuous basis (will withstand
            1500V AC dielectric strength test for one minute
            without breakdown) .
            Electromagnetic Field Immunity (EMI)
            Less than ±0 .25% of output span effect under the
            influence of electromagnetic fields from switching
            solenoids, commutator motors, and drill motors .
            Meets Immunity Standards Per EN50082-1
            Electrostatic Discharge (ESD) Immunity
            4KV direct contact and 8KV air-discharge to the
            enclosure port per EN61000-4-2 .
            Radiated Field Immunity (RFI)
            10V/M, 80 to 1000MHz AM and 900MHz keyed
            carrier, per EN61000-4-3 and ENV50204 .
            Electrical Fast Transient Immunity (EFT)
            2KV to power and 1KV to signal I/O per EN61000-4-4 .
            Conducted RF Immunity (CRFI)
            10Vrms, 150KHz to 80MHz, per EN61000-4-6 .
            Surge Immunity
            0 .5KV per EN61000-4-5 .
            Emissions Per European Norm EN50081-1
            Radiated Frequency Emissions
            30 to 1000MHz per EN55022 Class B .
            Approvals
            CE marked, UL & cUL listed .
            Hazardous Locations: Class I: Div . 2; Groups A, B, C, D
            ◆ Physical
            Enclosure
            Case: Self-extinguishing NYLON type 6 .6 polyamide
            thermoplastic UL94 V-2 NEMA Type 1 enclosure .
            Connectors (Removable Terminal Blocks)
            Wire Range: AWG #14-22 (AWG #12 stranded only) .
            Printed Circuit Boards
            Military grade FR-4 epoxy glass circuit board .
            Dimensions
            1 .05W x 4 .68H x 4 .35D inches .
            26 .7W x 95 .3H x 110 .5D millimeters .
            Ordering Information
            ◆ Models
            631T-0100
            Single channel isolator, AC-powered
            631T-0500
            Single channel isolator, DC-powered
            632T-0100
            Dual channel isolator, AC-powered
            632T-0500
            Dual channel isolator, DC-powered
            633T-0100
            Single input with dual isolated output, AC-powered
            633T-0500
            Single input with dual isolated output, DC-powered
            ◆ Accessories (see Page 21)
            PS5R-SD24
            Power supply (24V DC, 2 .5A) .
            TBK-B02
            Optional terminal block kit, barrier strip style, 4 pcs .
            TBK-S02
            Optional terminal block kit, spring clamp style, 4 pcs .
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T, 3 inches (75mm) or
            16 .7 inches (425mm)
            20RM-16-DIN
            19” rack-mount kit with DIN rail .
            Holds sixteen 630T transmitters .
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 5 –
            651T, 652T, 653T Multi-Channel, Two-Wire Isolators
            Description
            Models
            651T: Single I/O channel
            652T: Dual I/O channel
            653T: Single input, dual output (splitter)
            These units receive 4-20mA process current
            inputs and provide isolated 4-20mA output
            signals . Each channel operates independently
            and is isolated from the others to prevent inter-
            action between channels .
            For easy troubleshooting, each unit has LEDs and
            diagnostic test points . Power LEDs help identify
            output open loop conditions . The precision
            10 ohm sense resistor enables monitoring of the
            output signal without disturbing field wiring .
            Input / Output Ranges
            4 to 20mA DC input
            4 to 20mA DC output
            Power Requirement
            12 to 36V DC (loop-powered)
            Two-wire transmitter
            Approvals
            CE marked . UL, cUL listed
            Class I, Division 2, Groups A, B, C, D .
            Key Features & Benefits
            ■ Two channels in a single unit
            saves space and reduces costs .
            ■ Signal splitter model (653T) provides two
            identical outputs from one input signal .
            ■ Galvanic isolation eliminates ground loops,
            reduces noise, and blocks transient signals .
            ■ Independent channels prevent signal interac-
            tion and offer spares for later use .
            ■ Power LEDs provide a visual indication
            of operational process loops .
            ■ Excellent accuracy and stability ensure reliable
            DC current input ◆ Single/dual-channel DC-powered isolators ◆ Signal splitter
            Acromag
            DIN EN 50022, 35mm
            "T" RAIL DIN MOUNTING
            (59.4)
            2.34
            C
            L
            (95.3)
            3.75
            ZERO
            SPAN
            R
            1.05
            (26.7)
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            (107.1)
            4.215
            (99.1)
            3.90
            4.35
            (110.5)
            CHAN 1
            PWR
            CH1 IN CH1 OUT
            IN-
            IN+
            OUT-
            SNS
            OUT+
            11 12 13 14 15 16
            TB1
            CH2 IN CH2 OUT
            IN-
            IN+
            OUT-
            SNS
            OUT+
            21 22 23 24 25 26
            TB2
            TB1
            ZERO
            SPAN
            CHAN 2
            PWR
            INPUT CH1 OUT
            IN-
            IN+
            OUT-
            SNS
            OUT+
            11 12 13 14 15 16
            TB1
            CH2 OUT
            OUT-
            SNS
            OUT+
            21 22 23 24 25 26
            TB2
            Model 652T-0600
            Model 651T-0600
            Model 652T-0600
            Model 653T-0600
            TB1 TB2
            Model 653T-0600
            INPUT
            OUT
            PLC / DCS
            IN
            +
            – –
            +
            R L
            4-20mA
            24V DC
            4-20mA
            4-20mA Source
            651T
            +

            Field
            Device

            +
            Single channel shown. Dual channel units are available.
            Note: 670T series transmitters are for output resistive loads only (sources current).
            For more information on the 670T Transmitter, refer to Page 14. Application notes are on Page 16.
            Note: 650T series transmitters are for two-wire transmitter interfaces (sinks current).
            For application notes using 650T Transmitters, refer to Page 16.
            650T Series Isolation Diagram
            OUT OUT
            PLC / DCS
            IN

            +
            R L
            4-20mA
            +

            +

            671T
            Single channel shown. Quad channel units are available.
            4-20mA
            Field
            Device
            670T Series Isolation Diagram
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 6 –
            Performance Specifications
            Reference Test Conditions
            Input/Output current: 4 to 20mA; output load 500
            ohms; 77°F (25°C) .
            Input range
            4 to 20mA input (each channel) .
            Input burden
            Voltage drop (651T, 652T): Less than 1 .5V, typical
            (75 ohm equivalent) .
            Voltage drop (653T): Less than 3 .0V, typical
            (150 ohm equivalent) .
            Output range
            4-20mA DC output (each channel) .
            Rl = (Psupply-12V) / 0 .02
            Output compliance
            Psupply = 12V + (0 .02 x Rload)
            Output limiting
            Outputs are limited to 36mA .
            Output ripple
            Less than ±0 .1% of the maximum output span .
            Accuracy
            ±0 .1% of output span . Error includes the combined
            effects of isolator repeatability, hysteresis, terminal
            point linearity and adjustment resolution .
            Ambient temperature effect
            Less than ±0 .006% of input span per °F (±0 .01% per
            °C) over the ambient temperature range for reference
            test conditions . This specification includes the com-
            bined effects of zero and span over temperature .
            Calibration
            Two 15-turn potentiometers (zero and span)
            per channel, accessible from front of the unit .
            Bandwidth
            -3dB at 45Hz, typical .
            Response time
            For a step input, the output reaches 98% of output
            span in 15mS, typical .
            Noise rejection
            Common mode: 100dB at 60Hz, typical .
            Normal mode: -5dB at 60Hz, 100 ohm source, typical .
            Diagnostics
            LED power indicator: Off for output open loop detec-
            tion, power, or load compliance problem .
            Field test points: An internal 10 ohm sense resistor
            provides test points for monitoring the output signal
            current during field maintenance .
            ◆ Environmental
            Ambient Temperature
            Operating: -25 to 70°C (-13 to 158F) .
            Storage: -40 to 85°C (-40 to 185°F) .
            Relative Humidity
            5 to 95% .
            Power Requirement
            12 to 50V DC for each output channel .
            Isolation
            Inputs, outputs, and individual channels are
            isolated from each other for common-mode
            voltages up to 250V AC, or 354V DC off ground, on
            a continuous basis (will withstand 1500V AC dielectric
            strength test for one minute without breakdown) .
            Radiated Field Immunity (RFI)
            Complies with EN61000-4-3 Level 3 (10V/m,
            30 to 1000MHz) and European Norm EN50082-1 .
            Electromagnetic Field Immunity (EMI)
            Less than ±0 .25% of output span effect under the
            influence of electromagnetic fields from switching
            solenoids, commutator motors, and drill motors .
            Surge Immunity
            Complies with EN61000-4-5 Level 3 (2KV) and
            European Norm EN50082-1 .
            Electrical Fast Transient (EFT)
            Complies with EN61000-4-4 Level 3 (2KV) and
            European Norm EN50082-1 .
            Electrostatic Discharge (ESD)
            Complies with EN61000-4-2 Level 3 (8KV air, 4KV
            direct to the enclosure port) and European Norm
            EN50082-1 .
            Radiated Emissions
            Meets or exceeds European Norm EN50081-1 for Class
            B equipment .
            Approvals
            CE marked, UL & cUL listed .
            Hazardous Locations: Class I: Div . 2; Groups A, B, C, D
            ◆ Physical
            Enclosure
            Case: Self-extinguishing NYLON type 6 .6 polyamide
            thermoplastic UL94 V-2 NEMA Type 1 enclosure .
            Connectors (Removable Terminal Blocks)
            Wire Range: AWG #14-22 (AWG #12 stranded only) .
            Printed Circuit Boards
            Military grade FR-4 epoxy glass circuit board .
            Dimensions
            1 .05W x 4 .68H x 4 .35D inches .
            26 .7W x 95 .3H x 110 .5D millimeters .
            Shipping Weight
            1 pound (0 .45 Kg) packed .
            Ordering Information
            ◆ Models
            651T-0600
            Single channel 2-wire transmitter
            652T-0600
            Dual channel 2-wire transmitter
            653T-0600
            Single input with dual isolated output transmitter
            ◆ Accessories (see Page 21)
            PS5R-SD24
            Power supply (24V DC, 2 .5A) .
            TBK-B01
            Optional terminal block kit, barrier strip style, 2 pcs .
            TBK-S01
            Optional terminal block kit, spring clamp style, 2 pcs .
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T, 3 inches (75mm) or
            16 .7 inches (425mm)
            20RM-16-DIN
            19” rack-mount kit with DIN rail .
            Holds sixteen 650T transmitters .
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 7 –
            Description
            Models
            654T: Dual DC voltage input channels
            These units accept DC voltage input signals,
            provide isolation, and output proportional DC
            current signals . With two independent I/O
            channels in a slim package, the 654T is ideal for
            panel shops and end-users who require a high-
            density signal conditioner that can cover a broad
            range of measurement applications .
            Configuration is fast and easy . First, you select
            the input range for each channel with simple
            DIP switches . Then, you set your zero/full-scale
            output values using the noninteractive increase/
            decrease toggle switches on the front panel to
            modify the output signal until the desired output
            value is read on your voltmeter . The switches
            make it easy to calibrate a normal (proportional)
            or reverse-acting (inverse) response in seconds .
            After setting the desired calibration, you can
            engage the safety lockout feature on the DIP
            switch to prevent accidental changes and
            unauthorized tampering .
            The 654T provides two independent high-voltage
            input isolation circuits . Loss of power or a failure
            on one channel has no effect on the other . The
            second channel can be used as a built-in spare
            for reduced downtime should the first channel
            fail . The spare channel becomes operational by
            simply moving the wired terminal block over to
            the vacant channel .
            Input Ranges
            Bipolar: ±78mV to ±625mV (selectable ranges)
            Unipolar: 0–1 .25 to 0–10V DC (selectable ranges)
            Output Range
            4 to 20mA DC
            Power Requirement
            12 to 50V DC (loop-powered)
            Two-wire transmitter
            Approvals
            CE marked . UL, cUL listed
            Class I; Division 2; Groups A, B, C, D .
            Key Features & Benefits
            ■ DIP switch-configuration simplifies installation
            without analog pots, jumpers, or software .
            ■ Isolation eliminates ground loops, reduces
            noise, and blocks transient signals .
            ■ One-step calibration with increase/decrease
            toggle switches simplifies field adjustments for
            faster and easier maintenance .
            ■ Automatic self-calibration compensates for
            temperature effects and component aging to
            deliver maintenance-free operation .
            ■ Configuration lockout safety feature helps
            prevent tampering and accidental calibration
            changes .
            ■ Reverse-acting output capability enables
            inverse proportional control signals .
            ■ Dual channel model saves space and reduces
            equipment costs .
            ■ High-resolution 16-bit S-D A/D converters
            deliver superior accuracy for more reliable
            measurements .
            ■ Built-in transient voltage suppressors protect
            circuitry from electrical interference .
            DC voltage input ◆ Dual-channel DC-powered transmitters
            654T Multi-Channel, Two-Wire Transmitters
            IN 1 OUT 1
            OUT 2
            PLC / DCS
            +

            IN 2
            +

            +

            +

            R S
            4-20mA
            24V DC
            R S
            4-20mA
            24V DC
            Indicator
            654T
            +

            Ch-to-Ch
            Isolation
            DIN EN 50022, 35mm
            "T" RAIL DIN MOUNTING
            (59.4)
            2.34
            C
            L
            (95.3)
            3.75
            1.05
            (26.7)
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            (116.8)
            4.60
            R
            CHAN 2
            FS
            UP DN
            Z
            CHAN 1
            FS
            UP DN
            Z
            (99.1)
            3.90
            4.35
            (110.5)
            36
            CHANNEL 2
            TB3
            33
            21 22
            35 34 32 31
            OUT-
            OUT+
            IN-
            IN+
            CHANNEL 1
            OUT+
            OUT-
            IN+
            IN-
            23 24 25 26
            CH1 Dip Switches
            CH2 Dip Switches
            TB2
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 8 –
            Performance Specifications
            ◆ General Input
            Analog to Digital Converter (ADC)
            16-bit S-D A/D converter .
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz with
            100 ohm input unbalance .
            Common Mode: Better than 140dB @ 60Hz with
            100 ohm input unbalance .
            Input Overvoltage Protection
            Bipolar Transient Voltage Suppressors (TVS) .
            ◆ DC Voltage Input
            Input Range
            DIP switch-selectable . See table below .
            Input  Recommended
            Range  Minimum Span (10%)
            A) ±78mV  15mV
            B) ±156mV  31mV
            C) ±313mV  62mV
            D) ±625mV  124mV
            E) 0 to 1 .25V 125mV
            F) 0 to 2 .5V  250mV
            G) 0 to 5V  500mV
            H) 0 to 10V  1000mV
            Span adjust: See table above .
            Zero adjust: * full range .
            Input Impedance
            110K ohms, typical
            ◆ Output
            Output Range
            Range: 4 to 20mA DC, 3 .8 to 24mA range typical .
            Output Compliance
            R load = (V supply - 12V) / 0 .02A
            600 ohms at 24V DC supply
            Output Response Control
            Proportional/inverse selectable .
            Ambient Temperature Effect
            Better than ±0 .018% of input span per °C
            (±0 .01% per °F) .
            Output Resolution
            Output resolves to 1 part in 6546 for the nominal
            4 to 20mA output span .
            Output Response Time (for input step change)
            980mS typical to 98% of final output value .
            Accuracy (overall input to output)
            ±0 .1% of output span .
            ◆ Environmental
            Ambient Temperature
            Operating: -25 to 75°C (-13 to 167°F) .
            Storage: -40 to 85°C (-40 to 185°F) .
            Relative Humidity
            5 to 95%, noncondensing .
            Power Requirement
            12 to 50V DC @ 25mA for each output channel .
            Isolation
            Inputs, outputs, and individual channels are
            isolated from each other for common-mode
            voltages up to 250V AC, or 354V DC off ground, on
            a continuous basis (will withstand 1500V AC dielectric
            strength test for one minute without breakdown) .
            Radiated Field Immunity (RFI)
            Designed to comply with EN61000-4-3 Level 3 and
            EN50082-1 .
            Electromagnetic Field Immunity (EMI)
            Less than ±0 .25% of output span effect .
            Electrical Fast Transient (EFT)
            Complies with EN61000-4-4 Level 3 (2KV) and
            EN50082-1 .
            Electrostatic Discharge (ESD)
            Complies with EN61000-4-2 Level 3 (8KV air or 4KV
            direct) and EN50082-1 .
            Radiated Emissions
            Meets or exceeds EN50081-1 for Class B equipment .
            Approvals
            CE marked, UL & cUL listed .
            Hazardous Locations: Class I: Div . 2; Groups A, B, C, D
            ◆ Physical
            Enclosure
            Case: Self-extinguishing NYLON type 6 .6 polyamide
            thermoplastic UL94 V-2 NEMA Type 1 enclosure .
            Connectors (Removable Terminal Blocks)
            Wire Range: AWG #12-24 .
            Printed Circuit Boards
            Military grade FR-4 epoxy glass circuit board .
            Dimensions
            1 .05W x 4 .68H x 4 .35D inches .
            26 .7W x 118 .9H x 110 .5D millimeters .
            Shipping Weight
            1 pound (0 .45 Kg) packed .
            Ordering Information
            ◆ Models
            654T-0600
            Dual channel DC voltage 2-wire transmitter .
            Add “-C” suffix for optional factory configuration .
            ◆ Accessories (see Page 21)
            PS5R-SD24
            Power supply (24V DC, 2 .5A) .
            TBK-B01
            Optional terminal block kit, barrier strip style, 2 pcs .
            TBK-S01
            Optional terminal block kit, spring clamp style, 2 pcs .
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T, 3 inches (75mm) or
            16 .7 inches (425mm)
            20RM-16-DIN
            19” rack-mount kit with DIN rail .
            Holds sixteen 650T transmitters .
            IN+
            IN-
            OUT+
            OUT-
            DC
            Voltage
            4-20mA
            R Load
            Voltage
            Source
            +
            -
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right) . Cage clamp terminal is standard .
            Input Connections
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 9 –
            655T, 656T Multi-Channel, Two-Wire Transmitters
            Description
            Models
            655T: Single TC/mV input channel
            656T: Dual TC/mV input channel
            These units accept universal thermocouple and
            millivolt input signals, provide isolation, and out-
            put proportional DC current signals . The output
            can also be linearized to the input sensor signal .
            Single-channel 655T and dual-channel 656T units
            are ideal for panel shops and end-users who
            require a high-density signal conditioner that can
            cover a broad range of temperature measure-
            ment applications .
            Configuration is fast and easy . First, you select
            the input type with a simple DIP switch . Then,
            you set your zero/full-scale output values using
            a toggle switch on the front panel to increase
            or decrease the signal until you read the desired
            output value on your voltmeter . The toggles
            make it easy to calibrate a normal (proportional)
            or reverse-acting (inverse) response in seconds .
            After setting the desired calibration, just press
            the mode/set toggle and your configuration set-
            tings are safely saved to nonvolatile memory .
            Both models provide high-voltage input isolation
            (output and power circuits share a common) . On
            dual channel units, each channel operates inde-
            pendently, with inputs isolated from each other,
            to prevent interaction between channels .
            Input Ranges
            TC types: J, K, T, R, S, E, B, N
            (DIP switch selection)
            DC voltage: ±15 .6mV to ±62 .5mV, 0 to 1V DC
            Output Ranges
            4 to 20mA DC
            Power Requirement
            12 to 50V DC (loop-powered)
            Two-wire transmitter
            Approvals
            CE marked . UL, cUL listed
            Class I; Division 2; Groups A, B, C, D .
            Key Features & Benefits
            ■ Selectable thermocouple input types offer
            flexibility to fit many applications .
            ■ DIP switch-configuration and self-ranging
            technologies speed installation without pots,
            jumpers, or software .
            ■ Linearizer function provides an output that is
            linear to the temperature or millivolt signal .
            ■ Isolation eliminates ground loops, reduces
            noise, and blocks transient signals .
            ■ Toggle-switch calibration simplifies field
            adjustments for faster and easier maintenance .
            ■ Configuration lockout safety feature prevents
            tampering and accidental changes .
            ■ Reverse-acting output capability enables
            inverse proportional control signals .
            ■ Dual channel model saves space and reduces
            equipment costs .
            ■ CJC control only requires a millivolt source to
            calibrate modules
            ■ High-resolution S-D A/D converters deliver
            superior accuracy for reliable measurements .
            Thermocouple and millivolt input ◆ Single/dual channel loop-powered transmitter
            IN 1 OUT 1
            OUT 2
            PLC / DCS
            +

            IN 2
            +

            +

            +

            R S
            4-20mA
            24V DC
            R S
            4-20mA
            24V DC
            Indicator
            656T
            +

            Ch-to-Ch
            Isolation
            In = Out
            Isolation
            (99.1)
            3.90
            4.35
            (110.5)
            36
            OUT
            656T-0600
            656T-0600
            655T-0600
            TB3
            33
            IN CJC
            21 22
            35 34 32 31
            OUT-
            OUT+
            IN-
            IN+
            CJC IN OUT
            OUT+
            OUT-
            IN+
            IN-
            23 24 25 26
            CH1 Dip Switches
            CH2 Dip Switches
            TB2
            DIN EN 50022, 35mm
            "T" RAIL DIN MOUNTING
            (59.4)
            2.34
            C
            L
            (95.3)
            3.75
            1.05
            (26.7)
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            (118.9)
            4.68
            Acromag
            R
            CHAN 2
            CHAN 1
            FS
            Z
            DN UP
            FS
            Z
            DN UP
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 10 –
            Performance Specifications
            ◆ General Input
            Analog to Digital Converter (ADC)
            16-bit S-D A/D converter .
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz .
            Common Mode: Better than 100dB @ 60Hz .
            Input Overvoltage Protection
            Bipolar Transient Voltage Suppressors (TVS) .
            ◆ Thermocouple Input
            Input Ranges (switch-selectable)
            TC Type  Temperature Range  Accuracy
            J  -210 to 760°C (-346 to 1400°F) ±0 .5°C
            K  200 to 1372°C (-328 to 2502°F) ±0 .5°C
            T  -260 to 400°C (-436 to 752°F) ±0 .5°C
            R  -50 to 1768°C (-58 to 3214°F) ±1 .0°C
            S  -50 to 1768°C (-58 to 3214°F) ±1 .0°C
            E  -200 to 1000°C (-328 to 1832°F) ±0 .5°C
            B  260 to 1820°C (500 to 3308°F) ±1 .0°C
            N  -230 to 1300°C (-382 to 2372°F) ±0 .5°C
            Span adjust: Full range . 100°C or 3mV minimum span
            recommended .
            Zero adjust: 0 to 90 % of full range .
            Thermocouple Linearization
            On/off selectable .
            Thermocouple Break Detection
            TC sensor failure can be configured for either upscale
            or downscale .
            Cold Junction Compensation (CJC) Control
            On/off selectable .
            ◆ Millivolt Input
            Input Range
            Ranges: ±15 .6, ±31 .3, ±62 .5mV
            0 to 0 .125, 0 .25, 0 .5, 1 .0V DC
            Span adjust: 10 to * of range .
            Zero adjust: 0 to 90% of range .
            ◆ Output
            Output Range
            Range: 4 to 20mA DC, 3 .8 to 22mA range typical .
            Output Compliance
            Rload = (Vsupply - 12V) / 0 .02A
            Output Response Control
            Proportional/inverse selectable .
            Ambient Temperature Effect
            Better than ±0 .006% of input span per °C or
            ±100ppm/°C, whichever is greater .
            Output Response Time (for input step change)
            700mS typical to 98% of final output value .
            ◆ Environmental
            Ambient Temperature
            Operating: -25 to 75°C (-13 to 167°F) .
            Storage: -40 to 85°C (-40 to 185°F) .
            Relative Humidity
            5 to 95%, noncondensing .
            Power Requirement
            12 to 50V DC @ 25mA for each output channel .
            Isolation
            Inputs, outputs, and individual channels are
            isolated from each other for common-mode
            voltages up to 250V AC, or 354V DC off ground, on
            a continuous basis (will withstand 1500V AC dielectric
            strength test for one minute without breakdown) .
            Radiated Field Immunity (RFI)
            Complies with EN61000-4-3 Level 3 and EN50082-1 .
            Electromagnetic Field Immunity (EMI)
            Less than ±0 .25% of output span effect .
            Electrical Fast Transient (EFT)
            Complies with EN61000-4-4 Level 3 and EN50082-1 .
            Electrostatic Discharge (ESD)
            Complies with EN61000-4-2 Level 3 and EN50082-1 .
            Radiated Emissions
            Meets or exceeds EN50081-1 for Class B equipment .
            Approvals
            CE marked, UL & cUL listed .
            Hazardous Locations: Class I: Div . 2; Groups A, B, C, D .
            ◆ Physical
            Enclosure
            Case: Self-extinguishing NYLON type 6 .6 polyamide
            thermoplastic UL94 V-2 NEMA Type 1 enclosure .
            Connectors (Removable Terminal Blocks)
            Wire Range: AWG #12-24 .
            Printed Circuit Boards
            Military grade FR-4 epoxy glass circuit board .
            Dimensions
            1 .05W x 4 .68H x 4 .35D inches .
            26 .7W x 118 .9H x 110 .5D millimeters .
            Shipping Weight
            1 pound (0 .45 Kg) packed .
            Ordering Information
            ◆ Models
            655T-0600
            Single channel TC 2-wire transmitter . Full feature set .
            656T-0600
            Dual channel TC 2-wire transmitter . Full feature set .
            Add “-C” suffix for optional factory configuration .
            656T-E600
            Dual channel TC 2-wire transmitter . Economy version .
            TC Type J, K and 0-125mV input ranges only .
            No linearization . No inverse output (proportional only) .
            Accessories (see Page 21)
            PS5R-SD24
            Power supply (24V DC, 2 .5A) .
            DIN RAIL 3.0
            DIN RAIL 16.7
            DIN rail strip, Type T,
            3 inches (75mm) or 16 .7 inches (425mm)
            20RM-16-DIN
            19” rack-mount kit with DIN rail .
            Holds sixteen 650T series transmitters .
            IN+
            IN-
            OUT+
            OUT-
            TC
            Input
            Sensor
            CJC
            4-20mA
            R Load
            + -
            IN+
            IN-
            OUT+
            OUT-
            Millivolt
            Sensor
            CJC
            4-20mA
            R Load
            Voltage
            Source
            +
            -
            + -
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 11 –
            Description
            Models
            657T: Single RTD input channel
            658T: Dual RTD input channels
            These units accept universal RTD or resistance
            input signals and output proportional DC current
            signals . The output can also be linearized to the
            input sensor signal . Single-channel 657T and
            dual-channel 658T units are ideal for panel shops
            and end-users who require a high-density sig-
            nal conditioner that can accommodate a broad
            range of temperature measurement applications .
            Configuration is fast and easy . First, you select
            the input type with a simple DIP switch . Then,
            you set your zero/full-scale output values using
            a toggle switch on the front panel to increase
            or decrease the signal until you read the desired
            output value on your voltmeter . The toggles
            make it easy to calibrate a normal (proportional)
            or reverse-acting (inverse) response in seconds .
            After completing the calibration, just press the
            mode/set toggle and your configuration settings
            are safely saved to nonvolatile memory .
            Input Ranges
            RTD: 100 ohm Pt, 120 ohm Ni, 10 ohm Cu
            Resistance: 0 to 500 ohms
            Output Range
            4 to 20mA DC
            Power Requirement
            12 to 50V DC (loop-powered)
            Two-wire transmitter
            Approvals
            CE marked . UL, cUL listed
            Class I; Division 2; Groups A, B, C, D .
            Key Features & Benefits
            ■ Selectable RTD input types offer flexibility
            to fit many applications .
            ■  DIP switch-configuration and self-ranging
            technologies speed installation without pots,
            jumpers, or software .
            ■  Toggle-switch calibration simplifies field
            adjustments for faster and easier maintenance .
            ■  Configuration lockout safety feature prevents
            tampering and accidental changes .
            ■  Reverse-acting output capability enables
            inverse proportional control signals .
            ■  Dual channel model saves space and reduces
            equipment costs .
            ■  High-resolution S-D A/D converters deliver
            superior accuracy for reliable measurements .
            ■  Lead break detection supports upscale or
            downscale failsafe mode .
            RTD / resistance input ◆ Single/dual channel loop-powered transmitter
            657T, 658T Multi-Channel, Two-Wire Transmitters
            IN 1 OUT 1
            OUT 2
            PLC / DCS
            +

            IN 2
            +

            +

            +

            R S
            4-20mA
            24V DC
            R S
            4-20mA
            24V DC
            Indicator
            658T
            +

            (99.1)
            3.90
            4.35
            (110.5)
            36
            OUT
            658T-0600
            658T-0600
            657T-0600
            TB3
            33
            INPUT
            21 22
            35 34 32 31
            OUT-
            OUT+
            RTN
            IN+
            EXC+
            IN-
            INPUT OUT
            OUT+
            OUT-
            IN-
            IN+
            EXC+
            RTN
            23 24 25 26
            CH1 Dip Switches
            CH2 Dip Switches
            TB2
            DIN EN 50022, 35mm
            "T" RAIL DIN MOUNTING
            (59.4)
            2.34
            C
            L
            (95.3)
            3.75
            1.05
            (26.7)
            NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS)
            (118.9)
            4.68
            Acromag
            R
            CHAN 2
            CHAN 1
            FS
            Z
            DN UP
            FS
            Z
            DN UP
            Optional terminal blocks: barrier strip (left) and
            spring clamp (right). Cage clamp terminal is standard.
            Isolated Transmitters: 600T Series
            248-295-0880 ■  ■  ■  ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
            – 12 –
            Performance Specifications
            ◆ General Input
            Analog to Digital Converter (ADC)
            16-bit S-D A/D converter .
            Noise Rejection
            Normal Mode: Better than 40dB @ 60Hz .
            Common Mode: Better than 100dB @ 60Hz .
            Input Overvoltage Protection
            Bipolar Transient Voltage Suppressors (TVS) .
            Input Impedance
            400K ohm at 10mV span;
            input current, ±25nA, typical (±30nA, max .) .
            ◆ RTD Input
            RTD Input Ranges
            100W Pt, 120W Ni, or 10W Cu; user-configured .
            RTD  °C Range (°F Range)  Accuracy
            Pt1  -200 to 850°C (-328 to 1562°F) ±0 .25°C
            Pt2  -200 to 850°C (-328 to 1562°F) ±0 .25°C
            Ni  -80 to 320°C (-112 to 608°F) ±0 .25°C
            Cu -  200 to 260°C (-328 to 500°F) ±1 .00°C
            Alpha: Pt1 (a = 1 .3850), Pt2 (a = 1 .3911),
            Ni a = 1 .6720), Cu (a = 1 .4272) .
            2, 3, or 4-wire configurations supported . Module
            provides sensor excitation, linearization, lead-wire com-
            pensation, and sensor break detection .
            RTD Excitation Current
            0 .5mA DC typical, all types .
            RTD Lead-Wire Compensation
            25 ohms per lead .
            RTD Break Detection
            Configurable for either upscale or downscale .
            ◆ Resistance Input
            Resistance Input Range
            0 to 500 ohms .
            Resistance Accuracy
            ±0 .05 ohms .
            ◆ Output
            Output Range
            Range: 4 to 20mA DC, 3 .8 to 22mA range typical .
            Output Compliance
            Rload = (Vsupply - 12V) / 0 .02A
            Output Response Control
            Resistance Input Range
            0 to 500 ohms .
            Resistance Accuracy
            ±0 .05 ohms .
            ◆ Output
            Output Range
            Range: 4 to 20mA DC, 3 .8 to 22mA range typical .
            Output Compliance
            Rload = (Vsupply - 12V) / 0 .02A
            Output Response Control

            留言框

            • 產品:

            • 您的單位:

            • 您的姓名:

            • 聯系電話:

            • 常用郵箱:

            • 省份:

            • 詳細地址:

            • 補充說明:

            • 驗證碼:

              請輸入計算結果(填寫阿拉伯數字),如:三加四=7

            聯系我們

            contact us

            咨詢電話

            13636304209

            掃一掃,關注我們

            返回頂部




            无码人妻精品一区二区三区AV片